The rear-mounted side mowers with a hydropneumatic suspension system for cutter bar relief enable even and efficient mowing.

COLLISION SAFETY SYSTEM – CSS

Collision Safety System (CSS) – The special position of the hinge enables the cutter bar to move simultaneously backward and upward.

Hydropneumatic suspension system (HPS)

The hydropneumatic suspension system (HPS) ensures excellent adaptation to the ground and thus a precise cut and clean forage on all terrains and in all conditions.

SEQUENTIAL LIFT OF CUTTER BAR – SL

Hydraulic stabilisation enables the sequential lift of the cutter bar. The inside of the cutter bar is lifted first, and then the outside of the cutter bar.

TRANSPORT AND STORAGE

The transport position of the mower is 120° behind the tractor. In the same position, the mower can be stored on the stand (optional) in an area of 3,2 m2.

DIRECT DRIVE

Direct drive to the first disc via a PTO shaft, angle drive and double PTO joint.

Robust 3-point linkage

Robust 3-point linkage with higher mounting during transport.

SAFE TRANSPORT

Linkage with a safety transport system separated from the cutter bar partial lifting block allows good manoeuvrability when turning at the headlands.

AttributesSerial equipmentCompare models

SILVERCUT DISC 340 S

Working width

3.25 m

Nr. of discs

8

Nr. of blades

16

PTO rotation speed

1000

Weight

1080 kg

Power req.

54/72

Capacity

4 ha/h

Cutting height

40-70 mm

Windrow width

1.8-2.2 m

Disc rotation

in pairs

Transp. width

1.86 m

Transp. height

4 m

Ground clearance maks.

24 cm

SILVERCUT DISC 340 S

Blade Change

QCS - Quick Change System
S

Hydraulic connection

1x single-acting (1SA), 1x double-acting (1DA)
S

Suspension

Hydro-pneumatic
S

Other

Spare blades and safety brass pins, Additional wear skids - central
S

Driveline

Input PTO shaft with slip and free wheel clutch, Angle drive, PTO shafts, Double universal joint
S

Disc Drive Safety

DDSS with 4 brass pins
S

Collision Safety

CSS - Mechanical
S

Hitch

3-point linkage Cat. II and III
S
Product titleSILVERCUT DISC 340 SSILVERCUT DISC 300 SSILVERCUT DISC 380 S
Working width3.25 m2.9 m3.67 m
Nr. of discs8 7 9
Nr. of blades16 14 18
PTO rotation speed1000 1000 1000
Weight1080 kg1050 kg1140 kg
Power req.54/72 46/61 60/80
Capacity4 ha/h3.5 ha/h4.5 ha/h
Cutting height40-70 mm40-70 mm40-70 mm
Windrow width1.8-2.2 m1.4-1.8 m2.2-2.6 m
Disc rotationin pairs in pairs in pairs
Transp. width1.86 m1.86 m1.86 m
Transp. height4 m3.64 m4.32 m
Ground clearance maks.24 cm20 cm20 cm
Blade ChangeQCS - Quick Change SystemQCS - Quick Change SystemQCS - Quick Change System
Hydraulic connection1x single-acting (1SA), 1x double-acting (1DA)1x single-acting (1SA), 1x double-acting (1DA)1x single-acting (1SA), 1x double-acting (1DA)
SuspensionHydro-pneumaticHydro-pneumaticHydro-pneumatic
OtherSpare blades and safety brass pins, Additional wear skids - centralSpare blades and safety brass pins, Additional wear skids - centralSpare blades and safety brass pins
DrivelineInput PTO shaft with slip and free wheel clutch, Angle drive, PTO shafts, Double universal jointInput PTO shaft with slip and free wheel clutch, Angle drive, PTO shafts, Double universal jointInput PTO shaft with slip and free wheel clutch, Angle drive, PTO shafts, Double universal joint
Disc Drive SafetyDDSS with 4 brass pinsDDSS with 4 brass pinsDDSS with 4 brass pins
Collision SafetyCSS - MechanicalCSS - MechanicalCSS - Mechanical
Hitch3-point linkage Cat. II and III3-point linkage Cat. II and III3-point linkage Cat. III

SERVICES

Contact SIP. The SIP customer support team provides comprehensive professional support for the use of all our products.

Find a dealer

Get a Quote

Subscribe to SIPinformER

The information provided on the website and in all documents on the website is for information purposes only. We reserve the right to make changes and errors in the information. Please contact your dealer for an official quotation.