SIPartner Portal
en

Compare products

Compare products description
SILVERCUT DISC 300 S
Side mowers

SILVERCUT DISC 300 S

The rear-mounted side mowers with a hydro-pneumatic suspension system for cutter bar relief enable even and efficient mowing.
silvercut-disc-340-s-01
silvercut-disc-340-s-02
silvercut-disc-340-s-04
silvercut-disc-340-s-05
Products / Rear-mounted side mowers SILVERCUT DISC / Rear-mounted side mowers SILVERCUT DISC WITHOUT CONDITIONER / SILVERCUT DISC 300 S

Choose website language

  • SlovenščinaSlovenščina
  • EnglishEnglish
  • DeutschDeutsch
  • HrvatskiHrvatski
  • ItalianoItaliano
  • FrançaisFrançais
  • РусскийРусский
  • PolskiPolski
  • NederlandsNederlands
  • EestiEesti
  • EspañolEspañol
  • ČeskyČesky
    • Sip logo

    The construction of the SILVERCUT DISC 300 S mower ensures optimal power transmission and efficient mowing.

    The mower follows the ground perfectly and provides complete control over mowing, regardless of the complexity of the terrain.

    SEQUENTIAL LIFT OF CUTTER BAR - SL

    SEQUENTIAL LIFT OF CUTTER BAR - SL

    Hydraulic stabilisation (HS) enables the sequential lift (SL) of the cutter bar.

    The inside of the cutter bar is lifted first, and then the outside of the cutter bar.

    DIRECT DRIVE

    DIRECT DRIVE

    Direct drive to the first disc via a PTO shaft, angle drive and double PTO joint.

    COLLISION SAFETY SYSTEM - CSS

    COLLISION SAFETY SYSTEM - CSS

    The collision safety system (CSS) is released immediately in the event of a collision with an obstacle. The special position of the hinge enables the cutter bar to move simultaneously backward and upward. After colliding with an obstacle, the cutter bar automatically returns to the operating position.

    EXCELLENT ADAPTATION

    EXCELLENT ADAPTATION

    The hydropneumatic suspension system (HPS) ensures excellent adaptation to the ground and thus a precise cut and clean forage on all terrains and in all conditions. The relief rate can be easily and quickly adjusted before or during mowing.

    SAFE TRANSPORT

    SAFE TRANSPORT

    Linkage with a safety transport system separated from the cutter bar partial lifting block allows good manoeuvrability when turning at the headlands.

    TRANSPORT AND STORAGE

    TRANSPORT AND STORAGE

    The transport position of the mower is 120° behind the tractor. In the same position, the mower can be stored on the stand (optional) in an area of 3,2 m2.

    Show all benefits
    SILVERCUT DISC 300 S
    Working width 2.90
    Number of discs 7
    Number of blades 14
    Blade dimensions 110x48x4
    Discs rotation speed 3000
    PTO rotation speed 1000
    Weight 1050
    Required Tractor power 46/61
    Capacity 3.50
    Cutting height 40-70
    Swath width - min. 1.40
    Swath width - max. 1.80
    Discs rotation v paru
    Transport width 1.86
    Transport height 3.64
    SILVERCUT DISC 300 S
    Three point linkage Cat. II and III ICON
    Angle drive, PTO shaft and double universal joint ICON
    Friction safety clutch and freewheel clutch ICON
    1x single-acting hydraulic connection (1SA), 1x double-acting hydraulic connection (1DA) ICON
    CSS- Collision safety system ICON
    QCS - Quick change system and QCS tool ICON
    Spare blades and safety brass pins ICON
    Foldable protective curtains against flying debris (CE Norm) ICON
    Hydro-pneumatic suspension ICON
    SILVERCUT DISC 300 S

    Instruction for work and catalogue of additional equipment

    Product title
    Working width
    Number of discs
    Number of blades
    Blade dimensions
    Discs rotation speed
    PTO rotation speed
    Weight
    Required Tractor power
    Capacity
    Cutting height
    Swath width - min.
    Swath width - max.
    Discs rotation
    Transport width
    Transport height
    Three point linkage Cat. II and III
    Angle drive, PTO shaft and double universal joint
    Friction safety clutch and freewheel clutch
    1x single-acting hydraulic connection (1SA), 1x double-acting hydraulic connection (1DA)
    CSS- Collision safety system
    QCS - Quick change system and QCS tool
    Spare blades and safety brass pins
    Foldable protective curtains against flying debris (CE Norm)
    Hydro-pneumatic suspension
    SILVERCUT DISC 300 S
    2.90
    7
    14
    110x48x4
    3000
    1000
    1050
    46/61
    3.50
    40-70
    1.40
    1.80
    v paru
    1.86
    3.64
    ICON
    ICON
    ICON
    ICON
    ICON
    ICON
    ICON
    ICON
    ICON
    SILVERCUT DISC 380 S
    3.67
    9
    18
    110x48x4
    3000
    1000
    1140
    60/80
    4.50
    40-70
    2.20
    2.60
    v paru
    1.86
    4.32
    ICON
    ICON
    ICON
    ICON
    ICON
    ICON
    ICON
    ICON
    ICON
    SILVERCUT DISC 340 S
    3.25
    8
    16
    110x48x4
    3000
    1000
    1080
    54/72
    4.00
    40-70
    1.80
    2.20
    v paru
    1.86
    4.0
    ICON
    ICON
    ICON
    ICON
    ICON
    ICON
    ICON
    ICON
    ICON

    SIMILAR PRODUCTS

    SILVERCUT DISC 380 S

    ...

    SILVERCUT DISC 340 S

    ...

    Catalogs

    Products
    View Catalogue
    Robust grassland harvesting
    View Catalogue
    Manure spreaders
    View Catalogue

    Why SIP?

    View Catalogue

    REQUEST A PRINTED CATALOG

    Dealer map

    Find a dealer

    SERVICES

    Contact SIP. The SIP customer support team provides comprehensive professional support for the use of all our products.

    CUSTOMER SUPPORT
    CUSTOMER SERVICE
    SPARE PARTS
    +386 (03) 70 38 650