SILVERCUT DISC 380 S

The rear-mounted side mowers with a hydropneumatic suspension system for cutter bar relief enable even and efficient mowing.

GET A QUOTE

FIND A DEALER

SUBSCRIBE TO SIPINFORMER

COLLISION SAFETY SYSTEM – CSS

Collision Safety System (CSS) – The special position of the hinge enables the cutter bar to move simultaneously backward and upward.

hydropneumatic suspension system (HPS)

The hydropneumatic suspension system (HPS) ensures excellent adaptation to the ground and thus a precise cut and clean forage on all terrains and in all conditions.

SEQUENTIAL LIFT OF CUTTER BAR – SL

Hydraulic stabilisation enables the sequential lift of the cutter bar. The inside of the cutter bar is lifted first, and then the outside of the cutter bar.

TRANSPORT AND STORAGE

The transport position of the mower is 120° behind the tractor. In the same position, the mower can be stored on the stand (optional) in an area of 3,2 m2.

DIRECT DRIVE

Direct drive to the first disc via a PTO shaft, angle drive and double PTO joint.

Robust 3-point linkage

Robust 3-point linkage with higher mounting during transport.

SAFE TRANSPORT

Linkage with a safety transport system separated from the cutter bar partial lifting block allows good manoeuvrability when turning at the headlands.

SILVERCUT DISC 380 S

Working width

3.67 m

Nr. of discs

Nr. of blades

PTO rotation speed

1000

Weight

1140 kg

Power req.

60/80

Capacity

4.5 ha/h

Cutting height

40-70 mm

Windrow width

2.2-2.6 m

Disc rotation

in pairs

Transp. width

1.86 m

Transp. height

4.32 m

Ground clearance maks.

20 cm

SILVERCUT DISC 380 S

Blade Change

QCS - Quick Change System

Hydraulic connection

1x single-acting (1SA), 1x double-acting (1DA)

Driveline

Input PTO shaft with slip and free wheel clutch, Angle drive, PTO shafts, Double universal joint

Suspension

Hydro-pneumatic

Other

Spare blades and safety brass pins

Disc Drive Safety

DDSS with 4 brass pins

Collision Safety

CSS - Mechanical

Hitch

3-point linkage Cat. III

Product title	SILVERCUT DISC 380 S	SILVERCUT DISC 340 S	SILVERCUT DISC 300 S
Working width	3.67 m	3.25 m	2.9 m
Nr. of discs	9	8	7
Nr. of blades	18	16	14
PTO rotation speed	1000	1000	1000
Weight	1140 kg	1080 kg	1050 kg
Power req.	60/80	54/72	46/61
Capacity	4.5 ha/h	4 ha/h	3.5 ha/h
Cutting height	40-70 mm	40-70 mm	40-70 mm
Windrow width	2.2-2.6 m	1.8-2.2 m	1.4-1.8 m
Disc rotation	in pairs	in pairs	in pairs
Transp. width	1.86 m	1.86 m	1.86 m
Transp. height	4.32 m	4 m	3.64 m
Ground clearance maks.	20 cm	24 cm	20 cm
Blade Change	QCS - Quick Change System	QCS - Quick Change System	QCS - Quick Change System
Hydraulic connection	1x single-acting (1SA), 1x double-acting (1DA)	1x single-acting (1SA), 1x double-acting (1DA)	1x single-acting (1SA), 1x double-acting (1DA)
Driveline	Input PTO shaft with slip and free wheel clutch, Angle drive, PTO shafts, Double universal joint	Input PTO shaft with slip and free wheel clutch, Angle drive, PTO shafts, Double universal joint	Input PTO shaft with slip and free wheel clutch, Angle drive, PTO shafts, Double universal joint
Suspension	Hydro-pneumatic	Hydro-pneumatic	Hydro-pneumatic
Other	Spare blades and safety brass pins	Spare blades and safety brass pins, Additional wear skids - central	Spare blades and safety brass pins, Additional wear skids - central
Disc Drive Safety	DDSS with 4 brass pins	DDSS with 4 brass pins	DDSS with 4 brass pins
Collision Safety	CSS - Mechanical	CSS - Mechanical	CSS - Mechanical
Hitch	3-point linkage Cat. III	3-point linkage Cat. II and III	3-point linkage Cat. II and III