The construction of the SILVERCUT DISC 340 S mower ensures optimal power transmission and efficient mowing.
The mower follows the ground perfectly and provides complete control over mowing, regardless of the complexity of the terrain.
SEQUENTIAL LIFT OF CUTTER BAR - SL
Hydraulic stabilisation (HS) enables the sequential lift (SL) of the cutter bar.
The inside of the cutter bar is lifted first, and then the outside of the cutter bar.
DIRECT DRIVE
Direct drive to the first disc via a PTO shaft, angle drive and double PTO joint.
COLLISION SAFETY SYSTEM - CSS
The collision safety system (CSS) is released immediately in the event of a collision with an obstacle. The special position of the hinge enables the cutter bar to move simultaneously backward and upward. After colliding with an obstacle, the cutter bar automatically returns to the operating position.
EXCELLENT ADAPTATION
The hydropneumatic suspension system (HPS) ensures excellent adaptation to the ground and thus a precise cut and clean forage on all terrains and in all conditions. The relief rate can be easily and quickly adjusted before or during mowing.
SAFE TRANSPORT
Linkage with a safety transport system separated from the cutter bar partial lifting block allows good manoeuvrability when turning at the headlands.
TRANSPORT AND STORAGE
The transport position of the mower is 120° behind the tractor. In the same position, the mower can be stored on the stand (optional) in an area of 3,2 m2.
| Working width | 3.25 |
| Number of discs | 8 |
| Number of blades | 16 |
| Blade dimensions | 110x48x4 |
| Discs rotation speed | 3000 |
| PTO rotation speed | 1000 |
| Masa | 1080 |
| Required Tractor power | 54/72 |
| Capacity | 4.00 |
| Cutting height | 40-70 |
| Swath width - min. | 1.80 |
| Swath width - max. | 2.20 |
| Smer vrtenja diskov | v paru |
| Transport width | 1.86 |
| Transport height | 4.0 |
| Assembly time | 1 |
| Three point linkage Cat. II and III | ICON |
| Angle drive, PTO shaft and double universal joint | ICON |
| Friction safety clutch and freewheel clutch | ICON |
| 1x single-acting hydraulic connection (1SA), 1x double-acting hydraulic connection (1DA) | ICON |
| CSS- Collision safety system | ICON |
| QCS - Quick change system and QCS tool | ICON |
| Spare blades and safety brass pins | ICON |
| Foldable protective curtains against flying debris (CE Norm) | ICON |
| Hydro-pneumatic suspension | ICON |
SILVERCUT DISC 340 S
SILVERCUT DISC 380 S
SILVERCUT DISC 300 S