A finger conditioner with plastic (FPC) or steel (FSC) fingers damages the waxy epidermis of the leaves and stems and breaks the stems, thus allowing faster moisture loss. It lifts the grass and forms an airy windrow behind the mower during conditioning.

GET A QUOTE
FIND A DEALER
SUBSCRIBE TO SIPINFORMER

CONDITIONER WITH PLASTIC FIGERS

Rigid plastic fingers scrape and damage the epidermis on the stems and leaves and break the stems.

ADJUSTABLE CONDITIONING INTENSITY

Adjustable intensity of conditioning.

FASTER WILTING

The picture shows the points where the finger conditioner damages the epidermis and breaks the stems.

SEQUENTIAL LIFT OF CUTTER BAR – SL

Hydraulic stabilisation enables the sequential lift of the cutter bar. The inside of the cutter bar is lifted first, and then the outside of the cutter bar.

Robust 3-point linkage

Robust 3-point linkage with higher mounting during transport.

SAFE TRANSPORT

Linkage with a safety transport system separated from the cutter bar partial lifting block allows good manoeuvrability when turning at the headlands.

AIRY WINDROW BEHIND THE MOWER

During conditioning, it lifts the grass and forms an airy windrow behind the mower.

AttributesSerial equipmentCompare models

SILVERCUT DISC 300 S FPC

Working width

2.9 m

Windrow width

1.4-2.8 m

Nr. of discs

7

Nr. of blades

14

PTO rotation speed

1000

Weight

1310 kg

Power req.

60/80

Capacity

3.5 ha/h

Cutting height

40-70 mm

Conditioner type

Finger plastic

Disc rotation

in pairs

Transp. width

1.86 m

Transp. height

3.64 m

Ground clearance maks.

20 cm

SILVERCUT DISC 300 S FPC

Blade Change

QCS - Quick Change System
S

Hydraulic connection

1x single-acting (1SA), 1x double-acting (1DA)
S

Driveline

Input PTO shaft with slip and free wheel clutch, PTO shafts, Double universal joint, Angle drive
S

Suspension

Hydro-pneumatic
S

Other

Spare blades and safety brass pins, Additional wear skids - central
S

Disc Drive Safety

DDSS with 4 brass pins
S

Collision Safety

CSS - Mechanical
S

Hitch

3-point linkage Cat. II and III
S
Product titleSILVERCUT DISC 300 S FPCSILVERCUT DISC 340 S FSCSILVERCUT DISC 340 S FPCSILVERCUT DISC 300 S FSC
Working width2.9 m3.25 m3.25 m2.9 m
Windrow width1.4-2.8 m1.6-3 m1.6-3 m1.4-2.8 m
Nr. of discs7 8 8 7
Nr. of blades14 16 16 14
PTO rotation speed1000 1000 1000 1000
Weight1310 kg1454 kg1394 kg1370 kg
Power req.60/80 68/90 68/90 60/80
Capacity3.5 ha/h4 ha/h4 ha/h3.5 ha/h
Cutting height40-70 mm40-70 mm40-70 mm40-70 mm
Conditioner typeFinger plastic Finger steel Finger plastic Finger steel
Disc rotationin pairs in pairs in pairs in pairs
Transp. width1.86 m1.86 m1.86 m1.86 m
Transp. height3.64 m4 m4 m3.64 m
Ground clearance maks.20 cm24 cm24 cm20 cm
Blade ChangeQCS - Quick Change SystemQCS - Quick Change SystemQCS - Quick Change SystemQCS - Quick Change System
Hydraulic connection1x single-acting (1SA), 1x double-acting (1DA)1x single-acting (1SA), 1x double-acting (1DA)1x single-acting (1SA), 1x double-acting (1DA)1x single-acting (1SA), 1x double-acting (1DA)
DrivelineInput PTO shaft with slip and free wheel clutch, PTO shafts, Double universal joint, Angle driveInput PTO shaft with slip and free wheel clutch, PTO shafts, Double universal joint, Angle driveInput PTO shaft with slip and free wheel clutch, PTO shafts, Double universal joint, Angle driveInput PTO shaft with slip and free wheel clutch, PTO shafts, Double universal joint, Angle drive
SuspensionHydro-pneumaticHydro-pneumaticHydro-pneumaticHydro-pneumatic
OtherSpare blades and safety brass pins, Additional wear skids - centralSpare blades and safety brass pins, Additional wear skids - centralSpare blades and safety brass pins, Additional wear skids - centralSpare blades and safety brass pins, Additional wear skids - central
Disc Drive SafetyDDSS with 4 brass pinsDDSS with 4 brass pinsDDSS with 4 brass pinsDDSS with 4 brass pins
Collision SafetyCSS - MechanicalCSS - MechanicalCSS - MechanicalCSS - Mechanical
Hitch3-point linkage Cat. II and III3-point linkage Cat. II and III3-point linkage Cat. II and III3-point linkage Cat. II and III

Similar products

SILVERCUT DISC 340 S FSC

SILVERCUT DISC 340 S FPC

SILVERCUT DISC 300 S FSC

Katalogi

Why SIP?

Take a look

Grassland harvesting

Take a look

Product range

Take a look

Manure spreaders

Take a look

SERVICES

Contact SIP. The SIP customer support team provides comprehensive professional support for the use of all our products.

CUSTOMER SUPPORT

Layer 1support@sip.si

CUSTOMER SERVICE

Layer 1service@sip.si

SPARE PARTS

Layer 1parts@sip.si

+386 3 70 38 650

Find a dealer

Find a dealer

Get a Quote

Get a Quote

Subscribe to SIPinformER

Subscribe to SIPinformER

The information provided on the website and in all documents on the website is for information purposes only. We reserve the right to make changes and errors in the information. Please contact your dealer for an official quotation.

© 2024 SIP