SPIDER 815 8 HS

SPIDER 815|8    

The SPIDER 815|8 is a professional eight rotor tedder with a solid construction. It has a pivoting linkage with stabilizers which enables excellent ground contur following. The angle of the rotors can be adjusted depending on the quantity and humidity of the forage. For tedding near the edge of the pasture the wheels can be shifted to ensure the forage remains on the pasture.

Rotary tedders

Technical data
Working width (m)
7,85
Number of rotors
8
No. of spring tines per rotor
5
Rotor diameter (m)
1,30
Rotor rotation speed (rpm)
201
PTO rotation speed (rpm)
450 - 540
Weight (kg)
1055
Required tractor power (kW/HP)
60
Capacity (ha/h)
9,50
Angle adjustment (°)
16 - 20
Safety clutch (Nm)
1020
Machine width (m)
8,17
Transport width (m)
2,95
Transport height (m)
2,95
Transport lenght (m)
1,90
Tyre size - rotors
16x6.50 - 8
Tyre size - middle rotors (2x)
16x9,50 - 8
Equipment
Additional wheel with chain
Stabilizer
Road safety equipment
PTO shaft
Shock-absorber with spring
Jockey wheel with chain
Anti-wrap shields 16"
T - trailed version
Lighting equipment
- Obligatory equipment,    - Additional equipment,    - Serial equipment - More information
Multimedia
Photo gallery
SPIDER 815 1SPIDER 815 2SPIDER 815 3SPIDER 815 4SPIDER 815 5

 

Pivoting hitch

SPIDER 815|8 has a pivoting hitch for better maneuverability.

 

Hidravličen dvig SPIDER 815|8 is equipped with a hydraulic lift of the outer rotors and a mechanical lock. The lock can be released by pulling the rope from the tractor cab..

 

Support wheels

SPIDER 815|8 has support wheels with 3-stage adjustment of spreading height and angle (1) and adjustment for spreading near borders(2).

 

Spring tines

Spring arm holders made of high-quality round tubes. Spring tines made of high-quality SUPER C steel with five protective coats for a long life time. Spring tines, set parallel to the ground, turn the grass without damaging the turf. The inner tine is shorter than the outer tine.

 

The digit drive

The digit drive