1. The safety pins hold the spring tines in the event of breakage.
  2. Robustly mounted spring tines around the holder.
  3. Spring tine holders made of round tubes.
  4. Main rotor plate made of 4 mm steel.
  5. Lower reinforcement ring.
  6. A round profile in the ROBUST line 
  7. Robust casts for gearboxes and gears in semi-liquid grease with a lubricator for quiet and smooth running.
  8. Different lengths of spring tines, with the inner tine shorter than the outer, prevent forage contamination.

With the jockey wheel, the tedder follows the ground one step ahead. This ensures that the working height is always set correctly, the turf is protected, and the spring tines have a longer service life. The additional jockey wheel is especially recommended for working on slopes.

The innovative geometry of the rotors with spring tines of different lengths ensures optimal forage flow and even spreading. Productivity is improved, while forage stays clean.

By setting the spreading angle from 12° to 18°, the spreading pattern can be adjusted to the quantity and moisture of forage. As for the height of the cut, the spring tines can be additionally set by adjusting the height of the hitch.

All tedder models from the ROBUST line are equipped as a standard with the system for hydraulic rotor wheel steering (HS-Hydraulic Steering). When spreading or turning along the edges of the field, the tedder can be shifted left or right. This changes the direction of spreading away from the edge and prevents forage loss. With this system, a small quantity of forage can also be raked into a swath.

A = 2W + S + ∆
B = 4W + S + ∆

 

W – cutter bar working width
S – windrow width
A, B – working width of the tedder
∆  – additional tedder overlapping

 

Example:
For a mower with 6 discs with a working width of 2.60m (W) and a row width of 1.50m (S).

A = 2W + S + ∆
A = 2*2.60 + 1.50 + ∆
A = 6.70 + ∆

B = 4W + S + ∆
B = 4*2.60 + 1.50 + ∆
B = 11.90 + ∆

 

The right tedder for the 6-disc mower has a working width of at least 6.70 m. In this case, the ideal tedder would be SPIDER 685|6 (A) for overlapping 3 windrows or SPIDER 1100|10 (B) for overlapping 5 windrows.

 

TECHNICAL DATA          

Number of discs

5 6 7 8 9

3 windrows

Working width

Model

 

5,50 m

555|4

 

6,80 m

685|6

 

7,80 m

815|8

 

8,80 m

900|8

 

10,50 m

1100|10

5 windrows

Working width

Model

 

9,00 m

915|8/900|8

 

11,00 m

1100|10

 

13,00 m

1300|12

 

15,00 m

1500|14

 

17,00 m

1700|18*

*Tedder models in development.

8-rotor SPIDER 915|8

SPIDER 915|8

Working width

9.15 m

Nr. of rotors

8

Nr. of spring tines per rotor

6

Rotor diameter

1.6 m

Weight

1410 kg

Power req.

60/80

Capacity

13 ha/h

Transp. width

2.98 m

Transp. height

3.6 m

Hydraulic connection

  • 1x double-acting (1DA)
  • 1x single-acting (1SA)

Fenceline tedding

  • HS - Hydraulic steering

Spring tines holders

  • Round tubes

Spring tines

  • Double, different lengths, SUPER-C wire

Shock-absorbers

  • Mechanical

Driveline

  • PTO shaft with safety clutch
  • 2x universal joint
  • 2x double universal joint
  • Finger clutch on outer rotors

Hitch

  • Enganche de 3 puntos Cat. II

SERVICES

Contact SIP. The SIP customer support team provides comprehensive professional support for the use of all our products.

Find a dealer

Get a Quote

Subscribe to SIPinformER

The information provided on the website and in all documents on the website is for information purposes only. We reserve the right to make changes and errors in the information. Please contact your dealer for an official quotation.