1. The safety pins hold the spring tines in the event of breakage.
  2. Robustly mounted spring tines around the holder.
  3. Spring tine holders made of round tubes.
  4. Main rotor plate made of 4 mm steel.
  5. Lower reinforcement ring.
  6. Welded rectangular profile in the HD line.
  7. Robust casts for gearboxes and gears in semi-liquid grease with a lubricator for quiet and smooth running.
  8. Different lengths of spring tines, with the inner tine shorter than the outer, prevent forage contamination.

The modular construction of the connected segmented rotors allows a wide range of vertical adaptation to the ground even on difficult terrains. At the same time, linked safety railings give the machine stability and rigidity while working.

The double safety clutch, specially developed for tedders from the HD line with a working width of 13 and 15 m, protects the rotor system by dividing the transmission of the driving torque to each side of the machine separately. In case of machine overload, it prevents damage to the drive.

The finger clutch on each hinge for smooth and quiet running and load reduction. The finger clutch drive is maintenance-free and ensures reliable power transmission in all operating conditions.

The table below determines which tedder matches the working width of your mower to cover 3 or 5 windrows. It is recommended to cover an odd number of windrows so the tractor wheels do not drive on the forage. This is important for ensuring forage quality, reducing harvesting losses, and above all, for safety on sloping terrain.

 

TECHNICAL DATA          

Number of discs

5 6 7 8 9

3 windrows

Working width

Model

 

 

5,50 m

555|4

 

 

6,80 m

685|6

 

7,80 m

815|8

 

8,80 m

900|8

 

10,50 m

1100|10

5 windrows

Working width

Model

 

 

9,00 m

915|8

900|8

 

11,00 m

1100|10

 

13,00 m

1300|12

 

15,00 m

1500|14

 

17,00 m

1700|16*

*Tedder models in development.

SPIDER HD 1100|10, HD 1100|10 T - Mounted and trailed large-scale tedder with 10 rotors

SPIDER 1100|10

Working width

10.8 m

Nr. of rotors

10

Nr. of tine arms per rotor

6

Rotor diameter

1.45 m

Weight

1780 kg

Power req.

74/100

Capacity

16 ha/h

Transp. width

2.8 m

Transp. height

3.7 m

Hydraulic connection

  • 1x single-acting (1SA)
  • 1x double-acting (1DA)

Spring tines holders

  • Round tubes

Spring tines

  • Double, different lengths, SUPER-C wire

Shock-absorbers

  • Hydraulic

Driveline

  • Finger clutch
  • Input PTO shaft with safety clutch

Hitch

  • 3-point pivoting linkage Cat. II

SPIDER 1100|10 T

Working width

10.8 m

Nr. of rotors

10

Nr. of tine arms per rotor

6

Rotor diameter

1.45 m

Weight

2450 kg

Power req.

46/60

Capacity

16 ha/h

Transp. width

2.98 m

Transp. height

2.45 m

Hydraulic connection

  • 1x single-acting (1SA)
  • 1x double-acting (1DA)

Spring tines holders

  • Round tubes

Spring tines

  • Double, different lengths, SUPER-C wire

Shock-absorbers

  • /

Driveline

  • PTO shaft with safety clutch
  • Input wide angle PTO shaft
  • Finger clutch

Hitch

  • Drawbar with a transport frame

SERVICES

Contact SIP. The SIP customer support team provides comprehensive professional support for the use of all our products.

Find a dealer

Get a Quote

Subscribe to SIPinformER

The information provided on the website and in all documents on the website is for information purposes only. We reserve the right to make changes and errors in the information. Please contact your dealer for an official quotation.