The construction of the SILVERCUT DISC 270 S RRC mower ensures optimal power transmission and efficient mowing.
The mower follows the ground perfectly and provides complete control over mowing, regardless of the complexity of the terrain. With conditioning, faster wilting or drying can be achieved, thus preserving nutrients and ensuring better forage quality.
SEQUENTIAL LIFT - SL
Hydraulic stabilisation enables the sequential lift of the cutter bar.
The inside of the cutter bar is lifted first, and then the outside of the cutter bar
DIRECT DRIVE
Direct drive to the first disc via a PTO shaft, angle drive and double PTO joint.
CSS -COLLISION SAFETY SYSTEM
The collision safety system is released immediately in the event of a collision with an obstacle. The special position of the hinge enables the cutter bar to move simultaneously backward and upward.
After colliding with an obstacle, the cutter bar automatically returns to the operating position.
HYDRO-PNEUMATIC SUSPENSION - HPS
The hydropneumatic suspension system (HPS) ensures excellent adaptation to the ground and thus a precise cut and clean forage on all terrains and in all conditions.
The relief rate can be easily and quickly adjusted before or during mowing.
SAFE TRANSPORT
Linkage with a safety transport system separated from the cutter bar partial lifting block allows good manoeuvrability when turning at the headlands.
TRANSPORT AND STORAGE
The transport position of the mower is 120° behind the tractor. In the same position, the mower can be stored on the stand (optional) in an area of 3,2 m2.
ROLLER RUBBER CONDITIONER (RRC)
The profiled helix-shaped rubber rollers rotate against each other and compress stems lengthwise, allowing quick moisture loss.
WIDE WINDROW BEHIND THE MOWER
The conditioner distributes the forage over the entire width of the cutter bar behind the mower.
This type of conditioning is recommended for alfalfa and clover forages as it does not damage the delicate leaves and preserves the nutritional value of forage.
FAST WILTING
The picture shows the points where the stem is smashed while the leaves remain intact.
When conditioning with a roller rubber conditioner, the delicate leaves stay on the plant undamaged. This prevents leaf shredding and protein loss and ensures higher nutritional value and forage quality.
ADJUSTABLE CONDITIONING INTENSITY
With the adjustment of conditioning intensity, the pressure of the rollers can be set according to the amount and type of the forage.
| Working width | 2.47 |
| Number of discs | 6 |
| Number of blades | 12 |
| Blade dimensions | 110x48x4 |
| Discs rotation speed | 3000 |
| PTO rotation speed | 1000 |
| Masa | 1000 |
| Required Tractor power | 52/70 |
| Capacity | 3.00 |
| Cutting height | 40-70 |
| Swath width - min. | 0.70 |
| Swath width - max. | 2.40 |
| Transport width | 1.86 |
| Transport height | 3.20 |
| Three point linkage Cat. II and III | ICON |
| Angle drive, PTO shaft and double universal joint | ICON |
| Friction safety clutch and freewheel clutch | ICON |
| 1x single-acting hydraulic connection (1SA), 1x double-acting hydraulic connection (1DA) | ICON |
| Roller rubber conditioner (RRC) | ICON |
| Discs rotation in pairs | ICON |
| DDSS - disc drive safety system | ICON |
| CSS- Collision safety system | ICON |
| QCS - Quick change system and QCS tool | ICON |
| Spare blades and safety brass pins | ICON |
| Foldable protective curtains against flying debris (CE Norm) | ICON |
| Hydro-pneumatic suspension | ICON |
SILVERCUT DISC 270 S RRC
SILVERCUT DISC 340 S RRC
SILVERCUT DISC 300 S RRC