1. The specially shaped discs, made of 4 mm wear-resistant steel, ensure excellent forage flow and a long lifespan for the components.
  2. In case of overloading, the cutter bar is protected by the DDSS system. It consists of an intermediate flange with three brass pins, which break in the case of an overload, thus preventing damage to other elements. Replacing pins is quick and easy.
  3. The axis of the disk drive system is attached to the cutter bar with a double closed bearing enabling it to withstand higher loads, thus ensuring a long service life of the cutter bar.
  4. The QCS spring holder ensures that the blade retracts if it hits an obstacle. Blade holders are individually replaceable.
  5. The wear skids are made of wear-resistant HARDOX steel. The specially shaped wear skids with a large surface area protect the cutter bar and divert soil and sand under the cutter bar, thus reducing forage contamination.

3 brass pins ensure that work continues unimpeded in the event of a disc overload. Shearing of the brass pins absorbs the force and leaves the cutter bar intact.

The disc rotation towards the centre provides a narrower windrow and represents the optimal solution for downhill mowing on slopes and on extremely steep terrain. Disc rotation speed is 3185 rpm.

Constant ground adaptation ensures even mowing. The result is clean forage and undamaged turf.

Front mowers DISC F ALP

DISC 220 F ALP (ISO 540 MIN-1)

Working width

2.16 m

Nr. of discs

5

Nr. of blades

10

Weight

415 kg

Power req.

30/40

Capacity

2.5 ha/h

Transp. width

2.1 m

Blade Change

  • QCS - Quick Change System

Other

  • Additional wear skids - central
  • Spare blades and safety brass pins

Driveline

  • Input PTO shaft with slip and free wheel clutch
  • Angle drive
  • PTO shafts
  • Double universal joint

Disc Drive Safety

  • DDSS with 3 brass pins

Collision Safety

  • CSS - Mechanical

Hitch

  • 3-point linkage Cat. I and II

DISC 220 F ALP (DIN 1000 MIN-1)

Working width

2.16 m

Nr. of discs

5

Nr. of blades

10

Weight

415 kg

Power req.

30/40

Capacity

2.5 ha/h

Transp. width

2.1 m

Blade Change

  • QCS - Quick Change System

Driveline

  • Input PTO shaft with slip and free wheel clutch
  • Angle drive
  • PTO shafts
  • Double universal joint

Other

  • Spare blades and safety brass pins
  • Additional wear skids - central

Disc Drive Safety

  • DDSS with 3 brass pins

Collision Safety

  • CSS - Mechanical

Hitch

  • 3-point linkage Cat. I and II

DISC 260 F ALP (ISO 540 MIN-1)

Working width

2.57 m

Nr. of discs

6

Nr. of blades

12

Weight

460 kg

Power req.

38/50

Capacity

3 ha/h

Transp. width

2.53 m

Blade Change

  • QCS - Quick Change System

Other

  • Additional wear skids - central
  • Spare blades and safety brass pins

Driveline

  • Input PTO shaft with slip and free wheel clutch
  • Angle drive
  • PTO shafts
  • Double universal joint

Disc Drive Safety

  • DDSS with 3 brass pins

Collision Safety

  • CSS - Mechanical

Hitch

  • 3-point linkage Cat. I and II

DISC 260 F ALP (DIN 1000 MIN-1)

Working width

2.57 m

Nr. of discs

6

Nr. of blades

12

Weight

460 kg

Power req.

38/50

Capacity

3 ha/h

Transp. width

2.53 m

Blade Change

  • QCS - Quick Change System

Driveline

  • Input PTO shaft with slip and free wheel clutch
  • Angle drive
  • PTO shafts
  • Double universal joint

Other

  • Spare blades and safety brass pins
  • Additional wear skids - central

Disc Drive Safety

  • DDSS with 3 brass pins

Collision Safety

  • CSS - Mechanical

Hitch

  • 3-point linkage Cat. I and II

DISC 300 F ALP (ISO 540 MIN-1)

Working width

3 m

Nr. of discs

7

Nr. of blades

14

Weight

495 kg

Power req.

45/60

Capacity

3.5 ha/h

Transp. width

2.99 m

Blade Change

  • QCS - Quick Change System

Other

  • Additional wear skids - central
  • Spare blades and safety brass pins

Driveline

  • Input PTO shaft with slip and free wheel clutch
  • Angle drive
  • PTO shafts
  • Double universal joint

Disc Drive Safety

  • DDSS with 3 brass pins

Collision Safety

  • CSS - Mechanical

Hitch

  • 3-point linkage Cat. I and II

DISC 300 F ALP (DIN 1000 MIN-1)

Working width

3 m

Nr. of discs

7

Nr. of blades

14

Weight

495 kg

Power req.

45/60

Capacity

3.5 ha/h

Transp. width

2.99 m

Blade Change

  • QCS - Quick Change System

Driveline

  • Input PTO shaft with slip and free wheel clutch
  • Angle drive
  • PTO shafts
  • Double universal joint

Other

  • Spare blades and safety brass pins
  • Additional wear skids - central

Disc Drive Safety

  • DDSS with 3 brass pins

Collision Safety

  • CSS - Mechanical

Hitch

  • 3-point linkage Cat. I and II

SERVICES

Contact SIP. The SIP customer support team provides comprehensive professional support for the use of all our products.

Find a dealer

Get a Quote

Subscribe to SIPinformER

The information provided on the website and in all documents on the website is for information purposes only. We reserve the right to make changes and errors in the information. Please contact your dealer for an official quotation.