SILVERCUT DISC 340 S RRC

The roller rubber conditioner (RRC) smashes the stems and opens them lengthwise, thus allowing rapid loss of moisture. This type of conditioning is recommended for alfalfa and clover forages as it does not damage the delicate leaves and preserves the nutritional value of forage.

GET A QUOTE

FIND A DEALER

SUBSCRIBE TO SIPINFORMER

ROLLER RUBBER CONDITIONER (RRC)

The profiled helix-shaped rubber rollers rotate against each other and compress stems lengthwise, allowing quick moisture loss.

ADJUSTABLE CONDITIONING INTENSITY

With the adjustment of conditioning intensity, the pressure of the rollers can be set according to the amount and type of the forage.

FAST WILTING

The picture shows the points where the stem is smashed while the leaves remain intact.

WIDE WINDROW BEHIND THE MOWER

The conditioner distributes the forage over the entire width of the cutter bar behind the mower.

SEQUENTIAL LIFT OF CUTTER BAR – SL

Hydraulic stabilisation enables the sequential lift of the cutter bar. The inside of the cutter bar is lifted first, and then the outside of the cutter bar.

Robust 3-point linkage

Robust 3-point linkage with higher mounting during transport.

SAFE TRANSPORT

Linkage with a safety transport system separated from the cutter bar partial lifting block allows good manoeuvrability when turning at the headlands.

SILVERCUT DISC 340 S RRC

Working width

3.32 m

Nr. of blades

Nr. of discs

PTO rotation speed

1000

Weight

1524 kg

Power req.

68/90

Capacity

4 ha/h

Cutting height

40-70 mm

Windrow width

1.6-3 m

Conditioner type

Roller rubber

Disc rotation

combined

Transp. width

1.86 m

Transp. height

4 m

Ground clearance maks.

16 cm

SILVERCUT DISC 340 S RRC

Blade Change

QCS - Quick Change System

Hydraulic connection

1x single-acting (1SA), 1x double-acting (1DA)

Driveline

Input PTO shaft with slip and free wheel clutch, Angle drive, PTO shafts, Double universal joint

Suspension

Hydro-pneumatic

Other

Spare blades and safety brass pins, Additional wear skids - central

Disc Drive Safety

DDSS with 4 brass pins

Collision Safety

CSS - Mechanical

Hitch

3-point linkage Cat. II and III

Product title	SILVERCUT DISC 340 S RRC	SILVERCUT DISC 300 S RRC	SILVERCUT DISC 270 S RRC
Working width	3.32 m	2.9 m	2.47 m
Nr. of blades	16	14	12
Nr. of discs	8	7	6
PTO rotation speed	1000	1000	1000
Weight	1524 kg	1420 kg	1000 kg
Power req.	68/90	60/80	52/70
Capacity	4 ha/h	3.5 ha/h	3 ha/h
Cutting height	40-70 mm	40-70 mm	40-70 mm
Windrow width	1.6-3 m	1.2-2.4 m	0.7-2.4 m
Conditioner type	Roller rubber	Roller rubber	Roller rubber
Disc rotation	combined	in pairs	in pairs
Transp. width	1.86 m	1.86 m	1.86 m
Transp. height	4 m	3.64 m	3.2 m
Ground clearance maks.	16 cm	20 cm	20 cm
Blade Change	QCS - Quick Change System	QCS - Quick Change System	QCS - Quick Change System
Hydraulic connection	1x single-acting (1SA), 1x double-acting (1DA)	1x single-acting (1SA), 1x double-acting (1DA)	1x single-acting (1SA), 1x double-acting (1DA)
Driveline	Input PTO shaft with slip and free wheel clutch, Angle drive, PTO shafts, Double universal joint	Input PTO shaft with slip and free wheel clutch, Angle drive, PTO shafts, Double universal joint	Input PTO shaft with slip and free wheel clutch, Angle drive, PTO shafts, Double universal joint
Suspension	Hydro-pneumatic	Hydro-pneumatic	Hydro-pneumatic
Other	Spare blades and safety brass pins, Additional wear skids - central	Spare blades and safety brass pins, Additional wear skids - central	Spare blades and safety brass pins, Additional wear skids - central
Disc Drive Safety	DDSS with 4 brass pins	DDSS with 4 brass pins	DDSS with 4 brass pins
Collision Safety	CSS - Mechanical	CSS - Mechanical	CSS - Mechanical
Hitch	3-point linkage Cat. II and III	3-point linkage Cat. II and III	3-point linkage Cat. II and III