SILVERCUT DISC 800 C RC is mower conditioner equipped with a rubber (RC) conditioner. It is used in a combination with the SILVERCUT DISC 300 F RC. The mower combination is suitable for larger farms and Contractors, requiring high efficiency, durability, fast and easy control and low maintenance costs.
High-quality adaptation to terrain
The combination of the arm mounting location and central fitting of the cutter bar frame ensures optimum adaptation to terrain. Maximum angle of adaptation to terrain is ±15°.
Impact guard
In the event of a collision with an obstacle, the guard is immediately released. Due to the special position of the hinge, the cutter bar simultaneously moves backwards and upwards.
After colliding with an obstacle, the cutter bar automatically returns into the operating position. The sensitivity of the safety mechanism is freely adjustable.
Lifting the cutter bars
Lifting the cutter bars into the operating position for easy passage over mown swaths.
Hydraulic unloading of the cutter bar
The discharge rate can be easily and quickly adjusted before or during mowing. During mowing, the relief rate is visible on the manometer.
Storing
When the season is over, the machine can be stored on a 2.2×3m surface in a space lower than 4m.
Four support legs with a fast fixing system.
The basic layout of the machine when it is not attached defines the operating position (fitting height and forward tilt).
Rubber conditioner (RC)
Enables conditioning of clover forage.
The conditioning intensity can be adjusted in a continuously variable system.
The conditioner drastically shortens the forage drying time. The forage quality losses related to the bad weather are reduced. The conditioner brings up to 10% energy savings connected to the preparation and harvesting of the forage.
Paired disc rotation direction
Quick and efficient feed discharge. The specially designed discs ensure a quick and efficient forage flow even when mowing downhill.
Cutter bar characteristics
Wear-resistant cold pressed
HARDOX skids
DDSS (disc drive safety system)
Double closed bearing
Specially shaped disc
QCS (Quick change system)
| Larghezza di lavoro | 8.00 |
| Numero dei dischi | 14 (2x7) |
| Numero dei coltelli | 28 |
| Dimensioni delle lame | 110x48x4 |
| Giri dei dischi | 3000 |
| 1000 | |
| Peso | 2460 |
| Potenza richiesta | 120/160 |
| Produttività | 10.00 |
| Altezza di taglio | 40-70 |
| Larghezza andana - min. | 1,1 |
| Larghezza andana - max. | 2,4 |
| gumi | |
| Rotazione dei dischi | v paru |
| Larghezza di trasporto | 2.86 |
| Altezza di trasporto | 3.50 |
| Lunghezza di trasporto | 2.20 |
| Tempi di assemblaggio | 4 |
| Attacco a tre punti Cat. II e III | ICON |
| Scatola ad angolo, PTO con cardano universale, 2x doppio giunto universale | ICON |
| ICON | |
| Frizione di sicurezza a dischi e frizione a rotazione libera | ICON |
| Innesto idraulico: 1x a singolo effetto (1EW), 2x a doppio effetto (1DW) | ICON |
| ICON |
SILVERCUT DISC 800 C RC
SILVERCUT DISC 300 F FPC
