SIPartner Portal
nl

Compare products

Compare products description
SPIDER ROBUST

Schudders SPIDER

Sophisticated technology, easy operation, and complete stability at work guarantee optimal spreading or turning. Forage is distributed evenly over the field without contamination with soil and sand, which accelerates drying and ensures quality.
SPIDER 815-8 HS (6)
SPIDER 600-6 ALP (4)
SPIDER 815-8 T HS
SPIDER 815-8 HS (4)
SIP-SPIDER 615-6 HS_ZETOR(20)
BENO6554
Producten / SCHUDDERS SPIDER / SPIDER ROBUST

Choose website language

  • SlovenščinaSlovenščina
  • EnglishEnglish
  • DeutschDeutsch
  • HrvatskiHrvatski
  • ItalianoItaliano
  • FrançaisFrançais
  • РусскийРусский
  • PolskiPolski
  • NederlandsNederlands
  • EestiEesti
  • EspañolEspañol
  • ČeskyČesky
    • Sip logo

    Robust line tedders SPIDER with four, six, or eight rotors are equipped as standard with SIP’s hydraulic steering (HS) system which enables shifting the tedder to the left or right side and prevents spreading the forage outside of the of the field.

    The small diameter of the rotors and the robust double universal joint transmission gives efficient, versatile and long-lasting machines you can rely on.

    ROTOR ROBUST

    ROTOR ROBUST

    The innovative design of the rotors prevents damage to the turf and ensures clean forage. Spreading is fast and even, which allows for quick drying and preservation of nutrients in the forage.

    1
    The safety pins hold the spring tines in the event of breakage.

    2
    Robustly mounted spring tines around the holder.

    3
    Spring tine holders made of round tubes.

    4
    Main rotor plate made of 4 mm steel.

    5
    Lower reinforcement ring.

    6
    A welded rectangular profile in the HD line.

    7
    Robust casts for gearboxes and gears in semi-liquid grease with a lubricator for quiet and smooth running.

    8
    The different lengths of spring tines, with the inner tine shorter than the outer, prevent forage contamination.

    SPRING TINES HOLDERS

    SPRING TINES HOLDERS

    Spring tines holder made of round tube with tine loss protection.

     

    ADAPTATION TO THE TERRAIN

    ADAPTATION TO THE TERRAIN

    With the jockey wheel, the tedder follows the ground one step ahead. This ensures that the working height is always set correctly, the turf is protected, and the spring tines have a longer service life. The additional jockey wheel is especially recommended for working on slopes.

    EVEN FORAGE FLOW

    EVEN FORAGE FLOW

    The innovative geometry of the rotors with spring tines of different lengths ensures optimal forage flow and even spreading. Productivity is improved, while forage stays clean.

    SPREADING ANGLE ADJUSTMENT

    SPREADING ANGLE ADJUSTMENT

    By setting the spreading angle from 12° to 18°, the spreading pattern can be adjusted to the quantity and moisture of forage. As for the height of the cut, the spring tines can be additionally set by adjusting the height of the hitch.

    HYDRAULIC STEERING (HS)

    HYDRAULIC STEERING (HS)

    All tedder models from the ROBUST line are equipped as a standard with the system for hydraulic rotor wheel steering (HS-Hydraulic Steering). When spreading or turning along the edges of the field, the tedder can be shifted left or right. This changes the direction of spreading away from the edge and prevents forage loss. With this system, a small quantity of forage can also be raked into a swath.

    Hydraulic cylinder

    Hydraulic cylinder

    The hydraulic cylinder allows steering of the wheels to the left or to the right via a one-way hydraulic connection. The backpressure is in the hydraulic accumulator on the cylinder.

    Show all advantages

    SPIDER 455|4
    SPIDER 455|4
    Working width
    4.50
    Number of rotors
    4
    No. of spring tines per rotor
    6
    Masa
    630
    Required Tractor power
    15/20
    Capacity
    4.50
    Transport width
    2.90
    3-point pivoting linkage Cat. I and II
    PTO shatf with safety clutch
    1x single-acting connection (1SA), 1x single-acting connection for HS (1EW)
    Hydraulic steering (HS)
    Spring tine arms made of high-quality round tubes
    Double, different lengths spring tines made of SUPER-C wire
    Shock-absorbers with spring
    Compare models More
    SPIDER 555|4
    SPIDER 555|4
    Working width
    5.30
    Number of rotors
    4
    No. of spring tines per rotor
    6
    Masa
    646
    Required Tractor power
    15/20
    Capacity
    5.50
    Transport width
    2.95
    3-point pivoting linkage Cat. I and II
    PTO shatf with safety clutch
    1x single-acting connection (1SA), 1x single-acting connection for HS (1EW)
    Hydraulic steering (HS)
    Spring tine arms made of high-quality round tubes
    Double, different lengths spring tines made of SUPER-C wire
    Shock-absorbers with spring
    Compare models More
    SPIDER 615|6
    SPIDER 615|6
    Working width
    6.00
    Number of rotors
    6
    No. of spring tines per rotor
    5
    Masa
    755
    Required Tractor power
    44/60
    Capacity
    6.20
    Transport width
    2.82
    3-point linkage Cat. II
    PTO shatf with safety clutch
    2x double universal joint, 2x universal joint
    1x single-acting connection (1SA), 1x single-acting connection for HS (1EW)
    Hydraulic steering (HS)
    Spring tine arms made of high-quality round tubes
    Double, different lengths spring tines made of SUPER-C wire
    Shock-absorbers with spring
    Compare models More
    SPIDER 685|6
    SPIDER 685|6
    Working width
    6.80
    Number of rotors
    6
    No. of spring tines per rotor
    6
    Masa
    790
    Required Tractor power
    44/60
    Capacity
    7.00
    Transport width
    2.95
    3-point linkage Cat. II
    PTO shatf with safety clutch
    2x double universal joint, 2x universal joint
    1x single-acting connection (1SA), 1x single-acting connection for HS (1EW)
    Hydraulic steering (HS)
    Spring tine arms made of high-quality round tubes
    Double, different lengths spring tines made of SUPER-C wire
    Shock-absorbers with spring
    Compare models More
    SPIDER 815|8
    SPIDER 815|8
    Working width
    7.85
    Number of rotors
    8
    No. of spring tines per rotor
    5
    Masa
    1085
    Required Tractor power
    60/80
    Capacity
    9.50
    Transport width
    2.95
    3-point linkage Cat. II
    PTO shatf with safety clutch
    2x double universal joint, 2x universal joint, Finger clutch on outer rotors
    1x single-acting connection (1SA), 1x single-acting connection for HS (1EW)
    Hydraulic steering (HS)
    Spring tine arms made of high-quality round tubes
    Double, different lengths spring tines made of SUPER-C wire
    Shock-absorbers with spring
    Compare models More
    SPIDER 775|6
    SPIDER 775|6
    Working width
    7.60
    Number of rotors
    6
    No. of spring tines per rotor
    6
    Masa
    1170
    Required Tractor power
    60/80
    Capacity
    8.00
    Transport width
    2.98
    3-point linkage Cat. II
    PTO shatf with safety clutch
    2x double universal joint, Finger clutch on outer rotors
    1x single-acting connection (1SA), 1x single-acting connection for HS (1EW)
    Hydraulic steering (HS)
    Spring tine arms made of high-quality round tubes
    Double, different lengths spring tines made of SUPER-C wire
    Shock-absorbers with spring
    Compare models More
    SPIDER 815|8 T
    SPIDER 815|8 T
    Working width
    7.85
    Number of rotors
    8
    No. of spring tines per rotor
    5
    Masa
    1440
    Required Tractor power
    45/60
    Capacity
    9.50
    Transport width
    2.98
    Transport frame with 2-point linkage Cat. II
    PTO shatf with safety clutch
    2x double universal joint, 2x universal joint, Finger clutch on outer rotors
    2x single-acting (2EW), 1x double-acting for HS (1DW)
    Hydraulic steering (HS)
    Spring tine arms made of high-quality round tubes
    Double, different lengths spring tines made of SUPER-C wire
    Shock-absorbers with spring
    Compare models More
    SPIDER 915|8
    SPIDER 915|8
    Working width
    9.15
    Number of rotors
    8
    No. of spring tines per rotor
    6
    Masa
    1410
    Required Tractor power
    60/80
    Capacity
    13.00
    Transport width
    2.98
    3-point linkage Cat. II
    PTO shatf with safety clutch
    2x double universal joint, 2x universal joint, Finger clutch on outer rotors
    1x single-acting connection (1SA), 1x single-acting connection for HS (1EW)
    Hydraulic steering (HS)
    Spring tine arms made of high-quality round tubes
    Double, different lengths spring tines made of SUPER-C wire
    Shock-absorbers with spring
    Compare models More
    Tedders SPIDER - ROBUST LINE
    Tedders SPIDER - ROBUST LINE

    CATALOGI

    WAAROM SIP?
    why
    BEKIJK DE BROCHURE
    GRASVERWERKING
    SIP-Spravilo-travinja-katalog-naslovka
    Bekijk de catalogus
    SIP VERKOOPPROGRAMMA
    BEKIJK DE BROCHURE
    ORGANISCHE MESTSTROOIERS
    SIP-Trosilniki-organskih-gnojil-katalog-naslovka
    Bekijk de catalogus

    Bestel de gedrukte catalogus

    Other products

    HD line
    HD line
    SCHUDDERS SPIDER
    SCHUDDERS SPIDER
    ROBUST line
    ROBUST line
    HARKEN STAR
    HARKEN STAR
    ALP PROGRAMMA
    ALP PROGRAMMA
    BANDHARKEN AIR
    BANDHARKEN AIR
    NOVELTIES
    NOVELTIES
    MESTVERSPREIDERS ORION
    MESTVERSPREIDERS ORION
    DISC HD 1000 D FS
    DISC HD 1000 D FS
    Maaiers SILVERCUT DISC
    Maaiers SILVERCUT DISC
    STAR R 930|28 TC
    STAR R 930|28 TC
    STAR R 670|22 TC
    STAR R 670|22 TC
    Schudders SPIDER
    Schudders SPIDER
    STAR R 860|26 TS
    STAR R 860|26 TS
    DISC ALP
    4-rotor central swath rake STAR
    4-rotor central swath rake STAR
    SILVERCUT DISC
    Bandharken AIR
    Bandharken AIR
    DISC HD
    STAR R 870|26 TC
    STAR R 870|26 TC

    Dealer map

    KLANTENSERVICE

    Het klantenserviceteam van SIP biedt uitgebreide professionele ondersteuning en advies aan onze klanten.

    KLANTENSERVICE
    SERVICE EN KLACHTEN
    RESERVEONDERDELEN
    +386 3 70 38 650