SIPartner Portal
nl

Compare products

Compare products description
2-rotor zij-afleg STAR

2-rotor zij-afleg

This professional trailed twin rotor rake with low-maintenance modular rotors is equipped with the SIP–patented walking tandem. The parallelogram frame enables transport speeds of up to 40 km/h.
STAR 600-20 T (5)
STAR 600-20 T (4)
STAR 600-20 T (1)
STAR 600-20 T (2)
STAR 600-20 T (3)
star_700_2
star_700_1
STAR 700-22 T
Producten / HARKEN STAR / 2-rotor zij-afleg STAR

Choose website language

  • SlovenščinaSlovenščina
  • EnglishEnglish
  • DeutschDeutsch
  • HrvatskiHrvatski
  • ItalianoItaliano
  • FrançaisFrançais
  • РусскийРусский
  • PolskiPolski
  • NederlandsNederlands
  • EestiEesti
  • EspañolEspañol
  • ČeskyČesky
    • Sip logo

    The double-rotor rakes are designed for ease of use and high productivity.

    The modular rotors with four pairs of spring tines on each holder allow forming two single swaths or one double swath. The innovative walking tandem axle and height-adjustable double-bearing rotors ensure ground tracking and efficiency in all working conditions.

     

    Demander un devis
    Obtenez une brochure
    MODULAR ROTOR

    MODULAR ROTOR

    The rotary rakes with innovative SIP technologies such as a modular rotor and walking tandem axles, ensure efficient raking and clean and even swaths.

    1
    Cam track diameter of 42 cm.

    2
    Aluminium casting of the spring arm holders.

    3
    Continuously adjustable cam track.

    4
    The double bearing of the vertical rotor shaft.

    5
    Gear pair with a large module for easier power transmission.

    6
    Spring tine holders with two teflon bushings.

    7
    Robust mounting of the holder with three screws.

    8
    Individually replaceable double-bearing spring tine holders.

    ROTOR ROBUST

    ROTOR ROBUST

    Individually replaceable spring tine holders with two bushings and nipples (left).

    The cam track with a larger diameter is heat-treated against wear (right).

    SIP WALKING TANDEM

    SIP WALKING TANDEM

    Thanks to the rotation axis, the rake with a walking tandem axle follows the ground up to 50% more smoothly and evenly compared to the standard tandem. It enables optimal adaptation to terrain, a higher working speed and lower transfer of loads to the machine.

    WALKING TANDEM AXLE COMBINATION

    WALKING TANDEM AXLE COMBINATION

    The combination of a walking tandem on the rotor chassis at the front and rear axle allows for excellent adaptation to terrain. The working speed can be higher while the turf remains undamaged.

    The centre of gravity of the walking tandem mounting is located at the front of the rotor (picture on the left). Yet the wheels remain close to the spring tines providing maximum rotor stability even at higher speeds and on steep terrain.

    JOCKEY WHEEL

    JOCKEY WHEEL

    The jockey wheel on the rake enables faster work on varied terrain without damaging the spring tines and holders. An even and clean swath is guaranteed.

    The jockey wheel in front of the rotor ensures perfect ground tracking without the tines touching the ground. This ensures that the working height is always set correctly. The turf stays undamaged, the swaths are clean, and the spring tines and holders have a longer lifespan. An additional jockey wheel is recommended for working on slopes.

    3D ROTOR MOUNTING

    3D ROTOR MOUNTING

    Special 3D mounting allows free movement of the rotors and ensures complete ground tracking, regardless of the chassis position and a clean swath even on rugged terrain.

    The special cross-shaped hinges on the rotors enable perfect 3D ground tracking independently of the chassis. The spring tines always stay parallel to the ground, which ensures clean swaths even at higher working speeds.

    Robust 3D pivoting hinge in front of the rotor (picture on the right).

    WORKING HEIGHT ADJUSTMENT

    WORKING HEIGHT ADJUSTMENT

    The working height of the spring tines is adjustable, so the turf remains undamaged during raking, and the swath stays clean, free of soil and sand contamination. Hydraulic working height adjustment is available on several models.

    SWATH WIDTH ADJUSTMENT

    SWATH WIDTH ADJUSTMENT

    The swath width is set according to the quantity of forage and the width of the pick-up device.

    Show all advantages

    STAR 600|20 T
    STAR 600|20 T
    Working width
    3.40–6.20 / 6.00
    No. of tine arms per rotor (machine)
    2x10 (20)
    No. of spring tines per arm
    4
    Masa
    1480
    Required Tractor power
    30/40
    Capacity
    8.00
    Transport width
    2.25 - 2.99
    Parallelogram drawbar
    PTO shatf with safety clutch
    1x single-acting hydraulic connection (1SA), 1x double-acting hydraulic connection (1DA)
    Swath curtain
    Mechanical working height adjustment
    Walking tandem axle (SIP patent)
    Hydraulic lift of rotors
    Compare models More
    STAR 700|22 T
    STAR 700|22 T
    Working width
    6.88
    No. of tine arms per rotor (machine)
    10+12 (22)
    No. of spring tines per arm
    4
    Masa
    1950
    Required Tractor power
    37/50
    Capacity
    9.00
    Transport width
    2.99
    2-point trailed linkage Cat. II
    Wide angle PTO shaft with a safety clutch
    1x single-acting hydraulic connection (1SA)
    Swath curtain
    Mechanical working height adjustment
    Walking tandem axle (SIP patent)
    Hydraulic lift of rotors
    Compare models More
    STAR R 860|26 TS /H
    STAR R 860|26 TS /H
    Working width
    7.20 - 8.85
    No. of tine arms per rotor (machine)
    13 (26)
    No. of spring tines per arm
    4
    Masa
    2790
    Required Tractor power
    40/60
    Capacity
    12.50
    Transport width
    2.95
    Transport frame with 2-point pivoting linkage Cat. II
    Wide angle PTO shaft with a safety clutch
    2x double-acting hydraulic connection (2DW)
    Hydraulical working height adjustment
    Hydraulic lift of rotors
    Walking tandem axle (SIP patent) - front
    Swath curtain
    Compare models More
    Demander un devis

    CATALOGI

    WAAROM SIP?
    why
    BEKIJK DE BROCHURE
    GRASVERWERKING
    SIP-Spravilo-travinja-katalog-naslovka
    Bekijk de catalogus
    SIP VERKOOPPROGRAMMA
    BEKIJK DE BROCHURE
    ORGANISCHE MESTSTROOIERS
    SIP-Trosilniki-organskih-gnojil-katalog-naslovka
    Bekijk de catalogus

    Bestel de gedrukte catalogus

    Ostali izdelki

    HD line
    HD line
    SCHUDDERS SPIDER
    SCHUDDERS SPIDER
    ROBUST line
    ROBUST line
    HARKEN STAR
    HARKEN STAR
    ALP PROGRAMMA
    ALP PROGRAMMA
    BANDHARKEN AIR
    BANDHARKEN AIR
    NOVELTIES
    NOVELTIES
    MESTVERSPREIDERS ORION
    MESTVERSPREIDERS ORION
    DISC HD 1000 D FS
    DISC HD 1000 D FS
    Maaiers SILVERCUT DISC
    Maaiers SILVERCUT DISC
    STAR R 930|28 TC
    STAR R 930|28 TC
    STAR R 670|22 TC
    STAR R 670|22 TC
    Schudders SPIDER
    Schudders SPIDER
    STAR R 860|26 TS
    STAR R 860|26 TS
    DISC ALP
    4-rotor central swath rake STAR
    4-rotor central swath rake STAR
    SILVERCUT DISC
    Bandharken AIR
    Bandharken AIR
    DISC HD
    STAR R 870|26 TC
    STAR R 870|26 TC

    Dealer map

    KLANTENSERVICE

    Het klantenserviceteam van SIP biedt uitgebreide professionele ondersteuning en advies aan onze klanten.

    KLANTENSERVICE
    SERVICE EN KLACHTEN
    RESERVEONDERDELEN
    +386 3 70 38 650