nl

Compare products

Compare products description
1-rotor STAR

Single-rotor rakes

The single-rotor rakes with a modular rotor and SIP walking tandem axle enable smooth raking and evenly shaped, airy swaths.
SC DISC 300 S RC 1-2
SC DISC 300 S RC 1-6
DCIM100MEDIADJI_0514.JPG
SC DISC 300 S RC 1-4
SC DISC 300 S RC 1-7
Producten / HARKEN STAR / 1-rotor STAR

Choose website language

  • SlovenščinaSlovenščina
  • EnglishEnglish
  • DeutschDeutsch
  • HrvatskiHrvatski
  • ItalianoItaliano
  • FrançaisFrançais
  • РусскийРусский
  • PolskiPolski
  • NederlandsNederlands
  • EestiEesti
  • EspañolEspañol
  • ČeskyČesky
    • Sip logo

    The STAR single-rotor rakes with four double spring tines on the holder ensure even and clean swaths.

    With pivoting linkage, they are extremely agile, follow the tractor optimally, and have a small turning circle. They adapt perfectly to terrain and enable professional raking even on rugged terrains.

    MODULAR ROTOR

    MODULAR ROTOR

    The rotary rakes with innovative SIP technologies such as a modular rotor and walking tandem axles, ensure efficient raking and clean and even swaths.

    1
    Cam track diameter of 42 cm.

    2
    Aluminium casting of the spring arm holders.

    3
    Continuously adjustable cam track.

    4
    The double bearing of the vertical rotor shaft.

    5
    Gear pair with a large module for easier power transmission.

    6
    Spring tine holders with two teflon bushings.

    7
    Robust mounting of the holder with three screws.

    8
    Individually replaceable double-bearing spring tine holders.

    ROTOR ROBUST

    ROTOR ROBUST

    Individually replaceable spring tine holders with two bushings and nipples (left).

    The cam track with a larger diameter is heat-treated against wear (right).

    SIP WALKING TANDEM

    SIP WALKING TANDEM

    Thanks to the rotation axis, the rake with a walking tandem axle follows the ground up to 50% more smoothly and evenly compared to the standard tandem. It enables optimal adaptation to terrain, a higher working speed and lower transfer of loads to the machine.

    WALKING TANDEM AXLE COMBINATION

    WALKING TANDEM AXLE COMBINATION

    The combination of a walking tandem on the rotor chassis at the front and rear axle allows for excellent adaptation to terrain. The working speed can be higher while the turf remains undamaged.

    The centre of gravity of the walking tandem mounting is located at the front of the rotor (picture on the left). Yet the wheels remain close to the spring tines providing maximum rotor stability even at higher speeds and on steep terrain.

    JOCKEY WHEEL

    JOCKEY WHEEL

    The jockey wheel on the rake enables faster work on varied terrain without damaging the spring tines and holders. An even and clean swath is guaranteed.

    The jockey wheel in front of the rotor ensures perfect ground tracking without the tines touching the ground. This ensures that the working height is always set correctly. The turf stays undamaged, the swaths are clean, and the spring tines and holders have a longer lifespan. An additional jockey wheel is recommended for working on slopes.

    3D ROTOR MOUNTING

    3D ROTOR MOUNTING

    Special 3D mounting allows free movement of the rotors and ensures complete ground tracking, regardless of the chassis position and a clean swath even on rugged terrain.

    The special cross-shaped hinges on the rotors enable perfect 3D ground tracking independently of the chassis. The spring tines always stay parallel to the ground, which ensures clean swaths even at higher working speeds.

    Robust 3D pivoting hinge in front of the rotor (picture on the right).

    WORKING HEIGHT ADJUSTMENT

    WORKING HEIGHT ADJUSTMENT

    The working height of the spring tines is adjustable, so the turf remains undamaged during raking, and the swath stays clean, free of soil and sand contamination. Hydraulic working height adjustment is available on several models.

    SWATH WIDTH ADJUSTMENT

    SWATH WIDTH ADJUSTMENT

    The swath width is set according to the quantity of forage and the width of the pick-up device.

    Show all advantages

    STAR 360|10
    STAR 360|10
    Working width
    3.60
    No. of tine arms per rotor (machine)
    10
    No. of spring tines per arm
    4
    Masa
    495
    Required Tractor power
    22/30
    Capacity
    4.50
    Transport width
    1.68
    Assembly time
    3
    3-point linkage Cat. II
    Friction safety clutch and freewheel clutch
    Swath curtain
    Mechanical working height adjustment
    Walking tandem axle (SIP patent)
    Compare models More
    STAR 400|11
    STAR 400|11
    Working width
    4.00
    No. of tine arms per rotor (machine)
    11
    No. of spring tines per arm
    4
    Masa
    550
    Required Tractor power
    22/30
    Capacity
    5.00
    Transport width
    1.99
    Assembly time
    3
    3-point linkage Cat. II
    Friction safety clutch and freewheel clutch
    Swath curtain
    Mechanical working height adjustment
    Walking tandem axle (SIP patent)
    Compare models More
    STAR 430|12
    STAR 430|12
    Working width
    4.30
    No. of tine arms per rotor (machine)
    12
    No. of spring tines per arm
    4
    Masa
    564
    Required Tractor power
    22/30
    Capacity
    5.50
    Transport width
    2.20
    Assembly time
    3
    3-point linkage Cat. II
    Friction safety clutch and freewheel clutch
    Swath curtain
    Mechanical working height adjustment
    Walking tandem axle (SIP patent)
    Compare models More
    STAR 470|13
    STAR 470|13
    Working width
    4.70
    No. of tine arms per rotor (machine)
    13
    No. of spring tines per arm
    4
    Masa
    575
    Required Tractor power
    30/40
    Capacity
    6.20
    Transport width
    2.20
    Assembly time
    3
    3-point linkage Cat. II
    Friction safety clutch and freewheel clutch
    Swath curtain
    Mechanical working height adjustment
    Walking tandem axle (SIP patent)
    Compare models More
    STAR 430|12 T
    STAR 430|12 T
    Working width
    4.30
    No. of tine arms per rotor (machine)
    12
    No. of spring tines per arm
    4
    Masa
    710
    Required Tractor power
    20/27
    Capacity
    5.50
    Transport width
    2.08
    Assembly time
    2
    Parallelogram drawbar
    Wide angle PTO shaft with a safety clutch
    1x single-acting hydraulic connection (1SA)
    Swath curtain
    Mechanical working height adjustment
    Walking tandem axle (SIP patent)
    Hydraulic lift of rotors
    Compare models More
    MODULAR ROTOR

    MODULAR ROTOR

    The rotary rakes with innovative SIP technologies such as a modular rotor and walking tandem axles, ensure efficient raking and clean and even swaths.

    1
    Cam track diameter of 42 cm.

    2
    Aluminium casting of the spring arm holders.

    3
    Continuously adjustable cam track.

    4
    The double bearing of the vertical rotor shaft.

    5
    Gear pair with a large module for easier power transmission.

    6
    Spring tine holders with two teflon bushings.

    7
    Robust mounting of the holder with three screws.

    8
    Individually replaceable double-bearing spring tine holders.

    ROTOR ROBUST

    ROTOR ROBUST

    Individually replaceable spring tine holders with two bushings and nipples (left).

    The cam track with a larger diameter is heat-treated against wear (right).

    SIP WALKING TANDEM

    SIP WALKING TANDEM

    Thanks to the rotation axis, the rake with a walking tandem axle follows the ground up to 50% more smoothly and evenly compared to the standard tandem. It enables optimal adaptation to terrain, a higher working speed and lower transfer of loads to the machine.

    WALKING TANDEM AXLE COMBINATION

    WALKING TANDEM AXLE COMBINATION

    The combination of a walking tandem on the rotor chassis at the front and rear axle allows for excellent adaptation to terrain. The working speed can be higher while the turf remains undamaged.

    The centre of gravity of the walking tandem mounting is located at the front of the rotor (picture on the left). Yet the wheels remain close to the spring tines providing maximum rotor stability even at higher speeds and on steep terrain.

    JOCKEY WHEEL

    JOCKEY WHEEL

    The jockey wheel on the rake enables faster work on varied terrain without damaging the spring tines and holders. An even and clean swath is guaranteed.

    The jockey wheel in front of the rotor ensures perfect ground tracking without the tines touching the ground. This ensures that the working height is always set correctly. The turf stays undamaged, the swaths are clean, and the spring tines and holders have a longer lifespan. An additional jockey wheel is recommended for working on slopes.

    3D ROTOR MOUNTING

    3D ROTOR MOUNTING

    Special 3D mounting allows free movement of the rotors and ensures complete ground tracking, regardless of the chassis position and a clean swath even on rugged terrain.

    The special cross-shaped hinges on the rotors enable perfect 3D ground tracking independently of the chassis. The spring tines always stay parallel to the ground, which ensures clean swaths even at higher working speeds.

    Robust 3D pivoting hinge in front of the rotor (picture on the right).

    WORKING HEIGHT ADJUSTMENT

    WORKING HEIGHT ADJUSTMENT

    The working height of the spring tines is adjustable, so the turf remains undamaged during raking, and the swath stays clean, free of soil and sand contamination. Hydraulic working height adjustment is available on several models.

    SWATH WIDTH ADJUSTMENT

    SWATH WIDTH ADJUSTMENT

    The swath width is set according to the quantity of forage and the width of the pick-up device.

    Show all advantages

    Other products

    HD line
    HD line
    SCHUDDERS SPIDER
    SCHUDDERS SPIDER
    ROBUST line
    ROBUST line
    HARKEN STAR
    HARKEN STAR
    ALP PROGRAMMA
    ALP PROGRAMMA
    BANDHARKEN AIR
    BANDHARKEN AIR
    NOVELTIES
    NOVELTIES
    MESTVERSPREIDERS ORION
    MESTVERSPREIDERS ORION
    DISC HD 1000 D FS
    DISC HD 1000 D FS
    Maaiers SILVERCUT DISC
    Maaiers SILVERCUT DISC
    STAR R 930|28 TC
    STAR R 930|28 TC
    Schudders SPIDER
    Schudders SPIDER
    STAR R 860|26 TS
    STAR R 860|26 TS
    DISC ALP
    4-rotor central swath rake STAR
    4-rotor central swath rake STAR
    SILVERCUT DISC
    Bandharken AIR
    Bandharken AIR
    DISC HD
    STAR R 870|26 TC
    STAR R 870|26 TC

    Dealer map