SIPartner Portal
nl

Compare products

Compare products description
SPIDER ALP

Schudders SPIDER ALP

The rotary tedders with four or six rotors are light, robust and very agile. The innovative design of the rotor enables even spreading and turning of forage even in more demanding mountain areas.
SIP-SPIDER 350-4 ALP_PASQUALI
SIP-SPIDER 350-4 ALP_LINDER (1)
Producten / SCHUDDERS SPIDER / SPIDER ALP

Choose website language

  • SlovenščinaSlovenščina
  • EnglishEnglish
  • DeutschDeutsch
  • HrvatskiHrvatski
  • ItalianoItaliano
  • FrançaisFrançais
  • РусскийРусский
  • PolskiPolski
  • NederlandsNederlands
  • EestiEesti
  • EspañolEspañol
  • ČeskyČesky
    • Sip logo

    The SPIDER ALP rotary tedders are designed to work with tractors with less power on steep terrains and slopes.

    The tedders are robust, and their lightweight construction ensures exceptional manoeuvrability. They are intended for small and medium-sized farms and for forage spreading or turning in the mountain areas.

    ROTOR ALP

    ROTOR ALP

    The sophisticated rotor design with smaller diameters prevents damage to the turf and ensures clean forage. Simple folding of the rotors eases the transport, while the spring tines, made of high-quality steel, guarantee a long service life.

    1
    Different lengths of spring tines, with the inner tine being shorter than the outer, prevent ground scratching and forage contamination.

    2
    Robust mounting of spring tines with loss protection.

    3
    The spring tine holders are made of flat  steel. For the SPIDER 600I6 ALP model, the holders are made of round tubes.

    4
    The main rotor plate is made of 3 mm thick steel.

    5
    Robust gearbox made of ductile iron.

    6
    Rectangular profile.

     

    SPRING TINES HOLDERS

    SPRING TINES HOLDERS

    Flat steel spring tines holder with spring tine loss protection in SPIDER 350I4 ALP and 400I4 ALP.

    Spring tines holder made of round tube with spring tine loss protection in the SPIDER 600I6 ALP models.

    ADAPTATION TO THE TERRAIN

    ADAPTATION TO THE TERRAIN

    With the jockey wheel, the tedder follows the ground step by step. This ensures that the working height is always set correctly, the turf is protected, and the spring tines have a longer service life. The additional jockey wheel is especially recommended for working on slopes.

    SAFE WORK ON SLOPES

    SAFE WORK ON SLOPES

    The lightweight construction of the tedder is suitable for lower-power tractors. With the centre of gravity being very close to the tractor, the tedder enables safe work and optimal forage spreading or turning on steep terrain and slopes.

    EVEN FORAGE FLOW

    EVEN FORAGE FLOW

    The innovative geometry of the rotors with spring tines of different lengths ensures optimal forage flow and even spreading. Productivity is improved, while forage stays clean.

    Show all advantages

    Producten

    SPIDER 350|4 ALP
    SPIDER 350|4 ALP
    Working width
    3.40
    Number of rotors
    4
    No. of spring tines per rotor
    5
    Masa
    270
    Required Tractor power
    11/15
    Capacity
    3.50
    Transport width
    2.20
    3-point rigid linkage Cat. I and II
    PTO shatf with safety clutch
    2x universal joint
    Mechanical folding of external rotors
    Flat steel spring tines holder
    Double, different lengths spring tines made of SUPER-C wire
    Compare models More
    SPIDER 400|4 ALP /ALP 1.)
    SPIDER 400|4 ALP /ALP 1.)
    Working width
    4.00
    Number of rotors
    4
    No. of spring tines per rotor
    6
    Masa
    330/390
    Required Tractor power
    13/18
    Capacity
    4.00
    Transport width
    2.40
    3-point rigid linkage Cat. I and II/3-point pivoting linkage Cat. I and II
    PTO shatf with safety clutch
    1x single-acting hydraulic connection (1SA)
    2x universal joint
    Flat steel spring tines holder
    Double, different lengths spring tines made of SUPER-C wire
    Compare models More
    SPIDER 600|6 ALP
    SPIDER 600|6 ALP
    Working width
    6.00
    Number of rotors
    6
    No. of spring tines per rotor
    5
    Masa
    570
    Required Tractor power
    33/45
    Capacity
    6.20
    Transport width
    2.55
    3-point pivoting linkage Cat. I and II
    PTO shatf with safety clutch
    2x double universal joint, 2x universal joint
    1x single-acting hydraulic connection (1SA)
    Spring tine arms made of high-quality round tubes
    Double, different lengths spring tines made of SUPER-C wire
    Stabilizers
    Compare models More
    Tedders SPIDER ALP
    Tedders SPIDER ALP

    Other products

    HD line
    HD line
    SCHUDDERS SPIDER
    SCHUDDERS SPIDER
    ROBUST line
    ROBUST line
    HARKEN STAR
    HARKEN STAR
    ALP PROGRAMMA
    ALP PROGRAMMA
    BANDHARKEN AIR
    BANDHARKEN AIR
    NOVELTIES
    NOVELTIES
    MESTVERSPREIDERS ORION
    MESTVERSPREIDERS ORION
    DISC HD 1000 D FS
    DISC HD 1000 D FS
    Maaiers SILVERCUT DISC
    Maaiers SILVERCUT DISC
    STAR R 930|28 TC
    STAR R 930|28 TC
    STAR R 670|22 TC
    STAR R 670|22 TC
    Schudders SPIDER
    Schudders SPIDER
    STAR R 860|26 TS
    STAR R 860|26 TS
    DISC ALP
    4-rotor central swath rake STAR
    4-rotor central swath rake STAR
    SILVERCUT DISC
    Bandharken AIR
    Bandharken AIR
    DISC HD
    STAR R 870|26 TC
    STAR R 870|26 TC

    Dealer map

    KLANTENSERVICE

    Het klantenserviceteam van SIP biedt uitgebreide professionele ondersteuning en advies aan onze klanten.

    KLANTENSERVICE
    SERVICE EN KLACHTEN
    RESERVEONDERDELEN
    +386 3 70 38 650