SIPartner Portal
en

Compare products

Compare products description
SPIDER ALP

SPIDER ALP

The rotary tedders with four or six rotors are light, robust and very agile. The innovative design of the rotor enables even spreading and turning of forage even in more demanding mountain areas.
SIP-SPIDER 350-4 ALP_PASQUALI
SIP-SPIDER 350-4 ALP_LINDER (1)
Products / ROTARY TEDDERS SPIDER / SPIDER ALP

Choose website language

  • SlovenščinaSlovenščina
  • EnglishEnglish
  • DeutschDeutsch
  • HrvatskiHrvatski
  • ItalianoItaliano
  • FrançaisFrançais
  • РусскийРусский
  • PolskiPolski
  • NederlandsNederlands
  • EestiEesti
  • EspañolEspañol
  • ČeskyČesky
    • Sip logo

    The SPIDER ALP rotary tedders are designed to work with tractors with less power on steep terrains and slopes.

    The tedders are robust, and their lightweight construction ensures exceptional manoeuvrability. They are intended for small and medium-sized farms and for forage spreading or turning in the mountain areas.

    ROTOR ALP

    ROTOR ALP

    The sophisticated rotor design with smaller diameters prevents damage to the turf and ensures clean forage. Simple folding of the rotors eases the transport, while the spring tines, made of high-quality steel, guarantee a long service life.

    1
    Different lengths of spring tines, with the inner tine being shorter than the outer, prevent ground scratching and forage contamination.

    2
    Robust mounting of spring tines with loss protection.

    3
    The spring tine holders are made of flat steel. For the SPIDER 600I6 ALP model, the holders are made of round tubes.

    4
    The main rotor plate is made of 3 mm thick steel.

    5
    Robust gearbox made of ductile iron.

    6
    Rectangular profile.

     

    SPRING TINES HOLDERS

    SPRING TINES HOLDERS

    Flat steel spring tines holder with spring tine loss protection in SPIDER 350I4 ALP and 400I4 ALP.

    Spring tines holder made of round tube with spring tine loss protection in the SPIDER 600I6 ALP models.

    ADAPTATION TO THE TERRAIN

    ADAPTATION TO THE TERRAIN

    With the jockey wheel, the tedder follows the ground step by step. This ensures that the working height is always set correctly, the turf is protected, and the spring tines have a longer service life. The additional jockey wheel is especially recommended for working on slopes.

    SAFE WORK ON SLOPES

    SAFE WORK ON SLOPES

    The lightweight construction of the tedder is suitable for lower-power tractors. With the centre of gravity being very close to the tractor, the tedder enables safe work and optimal forage spreading or turning on steep terrain and slopes.

    EVEN FORAGE FLOW

    EVEN FORAGE FLOW

    The innovative geometry of the rotors with spring tines of different lengths ensures optimal forage flow and even spreading. Productivity is improved, while forage stays clean.

    Show all benefits

    SPIDER 350|4 ALP
    SPIDER 350|4 ALP
    Working width
    3.40
    Number of rotors
    4
    No. of spring tines per rotor
    5
    Weight
    270
    Required Tractor power
    11/15
    Capacity
    3.50
    Transport width
    2.20
    3-point rigid linkage Cat. I and II
    PTO shaft with safety clutch
    2x universal joint
    Mechanical folding of external rotors
    Flat steel spring tines holder
    Double, different lengths spring tines made of SUPER-C wire
    Compare models More
    SPIDER 400|4 ALP /ALP 1.)
    SPIDER 400|4 ALP /ALP 1.)
    Working width
    4.00
    Number of rotors
    4
    No. of spring tines per rotor
    6
    Weight
    330/390
    Required Tractor power
    13/18
    Capacity
    4.00
    Transport width
    2.40
    3-point rigid linkage Cat. I and II/3-point pivoting linkage Cat. I and II
    PTO shaft with safety clutch
    1x single-acting hydraulic connection (1SA)
    2x universal joint
    Flat steel spring tines holder
    Double, different lengths spring tines made of SUPER-C wire
    Compare models More
    SPIDER 600|6 ALP
    SPIDER 600|6 ALP
    Working width
    6.00
    Number of rotors
    6
    No. of spring tines per rotor
    5
    Weight
    570
    Required Tractor power
    33/45
    Capacity
    6.20
    Transport width
    2.55
    3-point pivoting linkage Cat. I and II
    PTO shaft with safety clutch
    2x double universal joint, 2x universal joint
    1x single-acting hydraulic connection (1SA)
    Spring tine arms made of high-quality round tubes
    Double, different lengths spring tines made of SUPER-C wire
    Stabilizers
    Compare models More
    Tedders SPIDER ALP
    Tedders SPIDER ALP

    Catalogs

    Products
    View Catalogue
    Robust grassland harvesting
    View Catalogue
    Manure spreaders
    View Catalogue

    Why SIP?

    View Catalogue

    REQUEST A PRINTED CATALOG

    Other products

    MOWERS
    MOWERS
    HD line
    HD line
    ROTARY TEDDERS SPIDER
    ROTARY TEDDERS SPIDER
    ROBUST line
    ROBUST line
    ROTARY RAKES STAR
    ROTARY RAKES STAR
    ALP LINE
    ALP LINE
    PICK-UP RAKES AIR
    PICK-UP RAKES AIR
    NOVELTIES
    NOVELTIES
    MANURE SPREADERS ORION
    MANURE SPREADERS ORION

    Dealer map

    Find a dealer
    Dealer map

    SERVICES

    Contact SIP. The SIP customer support team provides comprehensive professional support for the use of all our products.

    CUSTOMER SUPPORT
    CUSTOMER SERVICE
    SPARE PARTS
    +386 (03) 70 38 650