SIPartner Portal
en

Compare products

Compare products description
Trailed mowers SILVERCUT DISC

TRAILED MOWERS SILVERCUT

Trailed, side- or centrally mounted mowers with a finger or roller conditioner ensure smooth ground contour following, excellent manoeuvrability and high energy savings.
created by dji camera
750_7343
Products / SILVERCUT DISC / Trailed mowers SILVERCUT DISC

Choose website language

  • SlovenščinaSlovenščina
  • EnglishEnglish
  • DeutschDeutsch
  • HrvatskiHrvatski
  • ItalianoItaliano
  • FrançaisFrançais
  • РусскийРусский
  • PolskiPolski
  • NederlandsNederlands
  • EestiEesti
  • EspañolEspañol
  • ČeskyČesky
    • Sip logo

    The trailed mowers SILVERCUT DISC TS/TC FPC/FSC/RRC are very stable mowers that adapt optimally to terrain and thus enable quality mowing with greater energy savings, lower fuel consumption, and reduced wear.

    The trailed version of the mower provides high productivity even with lighter tractors. The simple and robustly welded construction ensures great agility as it turns at an angle of over 90°.

    With conditioning, faster wilting or drying can be achieved, thus preserving nutrients and ensuring better forage quality.

    CUTTER BAR SILVERCUT

    CUTTER BAR SILVERCUT

    For efficient mowing, we have designed a bolted cutter bar with specially shaped discs that ensure fast and efficient forage flow even when mowing on a slope.

    SPECIALLY SHAPED DISCS

    SPECIALLY SHAPED DISCS

    1
    The specially shaped disc, made of 4 mm wear-resistant steel, ensures excellent forage flow and a long lifespan for the components.

    2
    In case of overloading, the cutter bar is protected by the DDSS system. It consists of an intermediate flange with four brass pins, which break in the case of an overload, thus preventing damage to other elements. Replacing pins is quick and easy.

    3
    The axis of the disk drive system is attached to the cutter bar with a double closed bearing enabling it to withstand higher loads, thus ensuring a long service life of the cutter bar.

    4
    The QCS spring holder ensures that the blade retracts if it hits an obstacle. Blade holders are individually replaceable.

    5
    The wear skids are made of wear-resistant steel. The specially shaped wear skids with a large surface area protect the cutter bar and divert soil and sand under the cutter bar, thus reducing forage contamination.

     

    DISC DRIVE SAFETY SYSTEM - DDSS

    DISC DRIVE SAFETY SYSTEM - DDSS

    In 2007 SIP developed a new generation cutter bar, in which the DDSS was incorporated for the first time. No warranty claim related to the cutter bar has been filed since.

    4 brass pins ensure that work continues unimpeded in the event of a disc overload. Shearing of the brass pins absorbs the force and leaves the cutter bar intact.

    DISC ROTATION OPTIONS

    DISC ROTATION OPTIONS

    The option of disc rotation is chosen according to the harvesting technology:

    Disc rotation towards the centre enables a narrow windrow (SILVERCUT DISC 300 F ALP)..

    Discs rotation in pairs ensure a fast and efficient forage flow through the cutter bar and a wider windrows..

    The combined disc rotation offers optimal forage flow through the cutter bar and optimal windrow width.

     

    HYDRO-PNEUMATIC SUSPENSION - HPS

    HYDRO-PNEUMATIC SUSPENSION - HPS

    The hydro-pneumatic suspension system (HPS) ensures excellent adaptation to the ground and thus a precise cut and clean forage on all terrains and in all conditions. The relief rate can be easily and quickly adjusted before or during mowing.

    ADAPTATION TO THE TERRAIN

    ADAPTATION TO THE TERRAIN

    The mower’s special kinematics offers a perfect adaptation to terrain. The result is very efficient mowing and evenly mowed and undamaged turf.

    The combination of hydro-pneumatic suspension and innovative kinematics ensures great ground adaptation and smooth mowing on all types of terrain. The central mounting of the cutter bar frame enables a 50° adaptation range.

    S-FLOW

    S-FLOW

    The S-FLOW hitch is based on the innovative design of the cutter bar mounting that provides responsiveness of the system and perfect ground adaptation. In combination with the hydro-pneumatic suspension, it ensures even pressure on the ground and a clean cut across the field.

    With the S -FLOW hitch, the cutter bar adjusts to +14° upwards and -6° downwards. The maximum vertical movement of the cutter bar is from -200 mm to +300 mm.

    The maximum angle of lateral adaptation to terrain is ±14°.

    FINGER CONDITIONER

    FINGER CONDITIONER

    A finger conditioner with plastic (FPC) or steel (FSC) fingers damages the waxy epidermis of the leaves and stems and breaks the stems, thus allowing faster moisture loss. During conditioning, it lifts the grass and forms an airy windrow behind the mower.

    With conditioning, faster wilting or drying can be achieved, thus preserving nutrients and ensuring better forage quality.

    The shorter drying time also reduces the risk of bad weather and saves up the harvesting time.

    ROLLER CONDITIONER

    ROLLER CONDITIONER

    The roller rubber conditioner (RRC) smashes the stems and opens them lengthwise, thus allowing rapid loss of moisture. This type of conditioning is recommended for alfalfa and clover forages as it does not damage the delicate leaves and preserves the nutritional value of forage.

    When conditioning with a roller rubber conditioner, the delicate leaves stay on the plant undamaged. This prevents leaf shredding and protein loss and ensures higher nutritional value and forage quality.

     

    Show all benefits

    SILVERCUT LINE

    SILVERCUT DISC 300 TS FPC
    SILVERCUT DISC 300 TS FPC
    Working width
    2.90
    Number of discs
    7
    Number of blades
    Number of blades
    14
    Weight
    1750
    Required Tractor power
    60/80
    Capacity
    3.50
    Transport width
    3.00
    Drawbar Cat. II and III
    Angle drive, PTO shaft and double universal joint
    Friction safety clutch and freewheel clutch
    1x single-acting hydraulic connection (1SA), 1x double-acting hydraulic connection (1DA)
    Finger plastic conditioner (FPC)
    Discs rotation in pairs
    DDSS - disc drive safety system
    CSS- Collision safety system
    QCS - Quick change system and QCS tool
    Spare blades and safety brass pins
    Foldable protective curtains against flying debris (CE Norm)
    Hydro-pneumatic suspension
    Compare models More
    SILVERCUT DISC 300 TS RRC
    SILVERCUT DISC 300 TS RRC
    Working width
    2.90
    Number of discs
    7
    Number of blades
    Number of blades
    14
    Weight
    1880
    Required Tractor power
    60/80
    Capacity
    3.50
    Transport width
    3.00
    Drawbar Cat. II and III
    Angle drive, PTO shaft and double universal joint
    Friction safety clutch and freewheel clutch
    1x single-acting hydraulic connection (1SA), 1x double-acting hydraulic connection (1DA)
    Roller rubber conditioner (RRC)
    Discs rotation in pairs
    DDSS - disc drive safety system
    CSS- Collision safety system
    QCS - Quick change system and QCS tool
    Spare blades and safety brass pins
    Foldable protective curtains against flying debris (CE Norm)
    Hydro-pneumatic suspension
    Compare models More
    SILVERCUT DISC 300 TC RRC
    SILVERCUT DISC 300 TC RRC
    Working width
    2.90
    Number of discs
    7
    Number of blades
    Number of blades
    14
    Weight
    2250
    Required Tractor power
    60/80
    Capacity
    3.50
    Transport width
    3.00
    Drawbar Cat. II and III
    Angle drive, PTO shaft and double universal joint
    Friction safety clutch and freewheel clutch
    1x single-acting hydraulic connection (1SA), 1x double-acting hydraulic connection (1DA)
    Roller rubber conditioner (RRC)
    Discs rotation in pairs
    DDSS - disc drive safety system
    CSS- Collision safety system
    QCS - Quick change system and QCS tool
    Spare blades and safety brass pins
    Foldable protective curtains against flying debris (CE Norm)
    Hydro-pneumatic suspension
    Compare models More
    SILVERCUT DISC 380 TC RRC
    SILVERCUT DISC 380 TC RRC
    Working width
    3.67
    Number of discs
    9
    Number of blades
    Number of blades
    18
    Weight
    2400
    Required Tractor power
    68/90
    Capacity
    4.50
    Transport width
    3.60
    Drawbar Cat. II and III
    Angle drive, PTO shaft and double universal joint
    Friction safety clutch and freewheel clutch
    1x single-acting hydraulic connection (1SA), 1x double-acting hydraulic connection (1DA)
    Roller rubber conditioner (RRC)
    Discs rotation in pairs
    DDSS - disc drive safety system
    CSS- Collision safety system
    QCS - Quick change system and QCS tool
    Spare blades and safety brass pins
    Foldable protective curtains against flying debris (CE Norm)
    Hydro-pneumatic suspension
    Compare models More
    SILVERCUT DISC 380 TC FPC
    SILVERCUT DISC 380 TC FPC
    Working width
    3.67
    Number of discs
    9
    Number of blades
    Number of blades
    18
    Weight
    2300
    Required Tractor power
    68/90
    Capacity
    4.50
    Transport width
    3.77
    Drawbar Cat. II and III
    Angle drive, PTO shaft and double universal joint
    Friction safety clutch and freewheel clutch
    1x single-acting hydraulic connection (1SA), 1x double-acting hydraulic connection (1DA)
    Finger plastic conditioner (FPC)
    Discs rotation in pairs
    DDSS - disc drive safety system
    CSS- Collision safety system
    QCS - Quick change system and QCS tool
    Spare blades and safety brass pins
    Foldable protective curtains against flying debris (CE Norm)
    Hydro-pneumatic suspension
    Compare models More
    SILVERCUT DISC 380 TC FSC
    SILVERCUT DISC 380 TC FSC
    Working width
    3.67
    Number of discs
    9
    Number of blades
    Number of blades
    18
    Weight
    2350
    Required Tractor power
    68/90
    Capacity
    4.50
    Transport width
    3.77
    Drawbar Cat. II and III
    Angle drive, PTO shaft and double universal joint
    Friction safety clutch and freewheel clutch
    1x single-acting hydraulic connection (1SA), 1x double-acting hydraulic connection (1DA)
    Finger steel conditioner (FSC)
    Discs rotation in pairs
    DDSS - disc drive safety system
    CSS- Collision safety system
    QCS - Quick change system and QCS tool
    Spare blades and safety brass pins
    Foldable protective curtains against flying debris (CE Norm)
    Hydro-pneumatic suspension
    Compare models More

    SILVERCUT DISC 1500

    SILVERCUT DISC 1500
    SILVERCUT DISC 1500

    Catalogs

    Products
    View Catalogue
    Robust grassland harvesting
    View Catalogue
    Manure spreaders
    View Catalogue

    Why SIP?

    View Catalogue

    REQUEST A PRINTED CATALOG

    Ogled po kategorijah

    MOWERS
    MOWERS
    HD line
    HD line
    ROTARY TEDDERS SPIDER
    ROTARY TEDDERS SPIDER
    ROBUST line
    ROBUST line
    ROTARY RAKES STAR
    ROTARY RAKES STAR
    ALP LINE
    ALP LINE
    PICK-UP RAKES AIR
    PICK-UP RAKES AIR
    NOVELTIES
    NOVELTIES
    MANURE SPREADERS ORION
    MANURE SPREADERS ORION

    Dealer map

    Find a dealer
    Dealer map

    SERVICES

    Contact SIP. The SIP customer support team provides comprehensive professional support for the use of all our products.

    CUSTOMER SUPPORT
    CUSTOMER SERVICE
    SPARE PARTS
    +386 (03) 70 38 650