








THE HIGHEST PERFORMANCE
The SILVERCUT DISC T trailed mower combination can ensure the highest quality in the shortest time. By combining it with front mower the output is significantly higher.
Working width of 14.55 m (47.70 ft) and capacity of 22,5 ha/h (55.59 acres/h) is designed for the highest productivity.

HYDRO-PNEUMATIC SUSPENSION
The combination of hydro-pneumatic suspension and perfect kinematics ensures even ground adaptation and a smooth mowing on all types of terrain even at high speeds. The central mounting of the cutting bar frame enables cutting bars adjustment in the 50 ° range.

HYDRAULICAL STABILIZATION OF THE CUTTER BAR
The hydraulic stabilization enables the sequential lift of the cutter bars. Firs the inside of the cutter bar is lifted and subsequently the outside of the cutter bar. This prevents damage to the turf and at the same time prevents the free movement of the cutter bars during partial lifting.

OPTIMAL CHASSIS POSITION
Hydraulically adjustable hitching height enables the optimal chassis position regardless of the height of the drawbar.

STRONG SUPPORT ARMS
Strong support arms attached onto the chassis with pivoting central element ensure an excellent geometry of adjustment and kinematics of folding into the transport position.

CSS (collision safety system)
In the event of a collision with an obstacle the collision safety system is immediately released. The special position of the hinge enables the cutter bar to move simultaneously

RUBBER CONDITIONER (RC)
The rubber roller conditioner (RC) is recommended for regions with intensive alfalfa cultivation.
The helix-shaped conditioner ensures more precise conditioning. It only smashes the stems and does not damage the leaves. This way crop bleaching and leaf losses are prevented, and the nutritional value of the forage is protected.
The intensity of the rubber rollers can be set according to the grass yield and dryness of conditioned forage.

FINGER CONDITIONER (FC)
The finger conditioner (FC) is equipped with plastic finger tines, which breaks up the stems without mulching. The conditioner forms an airy swath, speeds up the moisture release and drastically shortens the forage drying time.
The forage quality losses related to the bad weather are reduced. The conditioner brings up to 10% energy savings connected to the preparation and harvesting of the forage.
SILVERCUT LINE




Three point linkage Cat. II. and III. |
Angle drive, PTO shaft and double universal joint |
Hydro-pneumatic suspension |
PTO shaft with friction clutch and freewheel |
1x single-acting hydraulic connection (1SA), 2x two-way hydraulic connection (2DW) |
CSS- Collision safety system |
QCS - Quick change system and QCS tool |
Spare blades and shear safety pins |
Foldable protective curtains against flying debris (CE Norm) |
Remote controller with universal RAM mount |
Frame SILVERCUT DISC 1500 T (base) |
Air brake single-axle, double-line |
Hydraulic brake single-axle, double-lined |




Three point linkage Cat. II. and III. |
Angle drive, PTO shaft and double universal joint |
Hydro-pneumatic suspension |
PTO shaft with friction clutch and freewheel |
1x single-acting hydraulic connection (1SA), 2x two-way hydraulic connection (2DW) |
CSS- Collision safety system |
QCS - Quick change system and QCS tool |
Spare blades and shear safety pins |
Foldable protective curtains against flying debris (CE Norm) |
Remote controller with universal RAM mount |
Frame SILVERCUT DISC 1500 T (base) |
Air brake single-axle, double-line |
Hydraulic brake single-axle, double-lined |
SILVERCUT DISC 1500
Catalogs
Order a printed catalog