SPIDER 915I8 with a working width of 9.15 m ensures maximum performance in its class.
The tedder is stable, follows the ground evenly, and gives optimal spreading. Hook spring tines may be installed for faster and more efficient spreading or turning of dense and heavy forage.
FLEXIBLE HITCH
The flexible hitch with three-point stabilisation offers flexible tracking to the tractor and balancing when lifting the machine.
GEARS IN OIL BATH
Robust gearbox housing with gears immersed in an oil bath for soft and quiet operation.
SMART LIFT
The SMART LIFT system automatically locks and additionally raises the external rotors during partial lifting, allowing greater ground clearance.
PARTIAL ROTOR LIFT
External rotors lifting at the partial lift with the SMART LIFT system.
SPECIALLY SHAPED SPRING TINES
Spring tines of different lengths with loss protection for clean forage. The 1.6 m diameter of the rotor allows the installation of hook spring tines, for multi-layer tedding of dense and heavy forage.
SPREADING ANGLE ADJUSTMENT
Adjustment of the turning angle from 13° to 19° according to forage quantity and moisture.
HYDRAULIC STEERING
The hydraulic steering (HS) system allows the turning of the rotors left or right, thus preventing forage loss when turning or spreading at the edges.
EXTERNAL ROTORS FOLDING
The folding mechanism of the external rotors in combination with the finger clutch allows a 180° angle in compact transport position.
REDUCED PRESSURE ON THE GROUND
The rotors with a larger wheel size ensure even weight distribution and reduce pressure on the ground. The dimension of the centre pair of wheels is adapted to the higher load of the machine in the middle and for stable storage of the machine in transport position.
| Working width | 9.15 |
| Number of rotors | 8 |
| No. of spring tines per rotor | 6 |
| Rotor diameter | 1.60 |
| Rotor rotation speed | 175 |
| PTO rotation speed | 450 - 540 |
| Weight | 1410 |
| Required Tractor power | 60/80 |
| Capacity | 13.00 |
| Spreading angle adjustment | 13° - 19° |
| Safety clutch | 1200 |
| Machine width | 9.85 |
| Transport width | 2.98 |
| Transport height | 3.60 |
| Transport lenght | 2.30 |
| Wheels - rotors | 16x6.50 - 8 |
| Wheels - middle rotors (2x) | 16X9.50 - 8 |
| 3-point linkage Cat. II | ICON |
| PTO shaft with safety clutch | ICON |
| 2x double universal joint, 2x universal joint, Finger clutch on outer rotors | ICON |
| 1x single-acting connection (1SA), 1x single-acting connection for HS (1EW) | ICON |
| Hydraulic steering (HS) | ICON |
| Spring tine arms made of high-quality round tubes | ICON |
| Double, different lengths spring tines made of SUPER-C wire | ICON |
| Shock-absorbers with spring | ICON |
SPIDER 915|8
SPIDER 455|4
SPIDER 555|4
SPIDER 615|6
SPIDER 685|6
SPIDER 775|6
SPIDER 815|8
SPIDER 815|8 T
