SILVERCUT DISC 1000 C (BASE)

The mowing combinations ensure high efficiency and low maintenance costs. These mowers are suitable for larger farms and contractors.

GET A QUOTE

FIND A DEALER

SUBSCRIBE TO SIPINFORMER

HYDROPNEUMATIC SUSPENSION – HPS

The hydropneumatic suspension (HPS) of the cutting bar ensures excellent adaptation to the terrain in the range of 35° upwards and 15° downwards.

NARROW OR WIDE LINKAGE

The mowing combinations are available with two linkage options. The distance between the cutter bars is 2.06 m at the narrow (front mower up to 3.0m ) and 2.80 m at the wide connection (front mower more than 3.0m ).

LINKAGE WITH HIGHER POSITION OF THE ARM PROTECTION SYSTEM

Connection with a higher position of the arm protection system. This system is separated from the blocks for a partial lift of the cutter bars.

DIRECT DRIVE

Direct drive to the first disc via a PTO shaft, angle drive and double PTO joint.

SEQUENTIAL LIFT – SL

Hydraulic stabilisation enables the sequential lift of the cutter bar. The inside of the cutter bar is lifted first, and then the outside of the cutter bar.

COLLISION SAFETY SYSTEM – CSS

The collision safety system is released immediately in the event of a collision. The position of the hinge enables the cutter bar to move simultaneously backward and upward. Then, the cutter bar automatically returns to the operating position.

TRANSPORT AND STORAGE

Adjustable support legs for storage in a compact transport position on an area of only 3.2 m2.

SILVERCUT DISC 1000 C (BASE)

Working width C

9.4 m

Working width CW

9.8 m

Nr. of discs

Nr. of blades

Disc rotation

in pairs

PTO rotation speed

1000

Weight C

2390 kg

Weight CW

2530 kg

Power req.

120/160

Cutting height

40-70 mm

Windrow width

2.2-2.6 m

Transp. width C

2.7 m

Transp. width CW

3.05 m

Capacity

14 ha/h

Transp. height C

4.49 m

Transp. height CW

4.43 m

Clearance C

20 cm

Clearance CW

20 cm

SILVERCUT DISC 1000 C (BASE)

Hitch

3-point linkage Cat. II and III

Driveline

Input PTO shaft with slip and free wheel clutch, PTO shafts, Double universal joint, Angle drive

Hydraulic connection

1x single-acting (1SA), 2x double-acting (2DA)

Suspension

Hydro-pneumatic

Collision Safety

CSS - Mechanical

Disc Drive Safety

DDSS with 4 brass pins

Blade Change

QCS - Quick Change System

Other

Spare blades and safety brass pins, Additional wear skids

Product title	SILVERCUT DISC 1000 C (BASE)	SILVERCUT DISC 900 C (BASE)
Working width C	9.4 m	8.55 m
Working width CW	9.8 m	8.95 m
Nr. of discs	18	16
Nr. of blades	36	32
Disc rotation	in pairs	in pairs
PTO rotation speed	1000	1000
Weight C	2390 kg	2200 kg
Weight CW	2530 kg	2340 kg
Power req.	120/160	90/120
Cutting height	40-70 mm	40-70 mm
Windrow width	2.2-2.6 m	1.8-2.2 m
Transp. width C	2.7 m	2.7 m
Transp. width CW	3.05 m	3.05 m
Capacity	14 ha/h	12 ha/h
Transp. height C	4.49 m	4 m
Transp. height CW	4.43 m	4 m
Clearance C	20 cm	13 cm
Clearance CW	20 cm	18 cm
Hitch	3-point linkage Cat. II and III	3-point linkage Cat. II and III
Driveline	Input PTO shaft with slip and free wheel clutch, PTO shafts, Double universal joint, Angle drive	Input PTO shaft with slip and free wheel clutch, PTO shafts, Double universal joint, Angle drive
Hydraulic connection	1x single-acting (1SA), 2x double-acting (2DA)	1x single-acting (1SA), 2x double-acting (2DA)
Suspension	Hydro-pneumatic	Hydro-pneumatic
Collision Safety	CSS - Mechanical	CSS - Mechanical
Disc Drive Safety	DDSS with 4 brass pins	DDSS with 4 brass pins
Blade Change	QCS - Quick Change System	QCS - Quick Change System
Other	Spare blades and safety brass pins, Additional wear skids	Spare blades and safety brass pins, Additional wear skids