Manure spreader
Orion 80 PRO
ORION 80PRO
|
|
Strong and stable construction. The trapezium-shaped chassis prevents the twisting of the frame and the loading compartment. |
|
|
Standard equipment includes an overrun brake. A hydraulic or pneumatic brake is available as optional. |
|
|
The spreader is equipped with a vertical spreading unit with four rotors achieving a maximum spreading width of 10 m. |
|
|
The chain conveyor has four high-quality 11x31 mm chains and slats made from a bending and twisting resistant material. Tensioning of the conveyor is automatic. |
|
|
Spreading segments of the rotor are made from wear resistant materials which enable fine spreading, especially on grassland. |
|
|
The RT 300 gearbox,lubricated with oil and driven by a hydraulic motor, enables continuously variable movement forward and backward. |
|
|
The valve for continuously variable regulation of the conveyor movement enables the spreading of a desired amount of manure per hectare. Movement regulation and other commands are carried out from the tractor cab. |
Gross weight (kg)
8000
Load capacity (kg)
5700
Weight [kg]
2300
Max. length (m)
6,72
Max. width (m)
2,20
Max. height (m)
2,65
Height of sides (m)
0,5
Loading surface (m)
4,6x1,9
Loading volume (m3)
8
Drawbar load (kg)
1300
Required tractor power [kW]
59
Distance between wheels (m)
1600
PTO (rpm)
540
Overrun
Brake hydraulic single axle
Brake pneumatic one axle single circuit
Brake pneumatic one axle double circuit
Side walls - steel
Spreading device vertikal - four beaters
Conveyor drive - hydrostatic
Conveyor floor -4 chains 11x31
Drawbar screwed upper
Drawbar screwed lower
Spreading device protection haydraulic wall
Hydraulically movable rear wall
Tyres 500/50-17-17PR
Wall extensions - steel (0,5 m )
PTO shaft
Legend:
- Additional equipment,
- Serial equipment
- Additional equipment,
- Serial equipment
