Manure spreader

Orion 155T PRO

Trosilnik gnoja Orion 155T PRO  

ORION 155T PRO

 

Tensioners of the conveyor chain

         Tensioners of the conveyor chain are located at the front of the spreader and can easily be accessed. Double-circuit air brake system, with ALB (antilock brake), or hydraulic brakes, enable a high level of security and effective braking.

 

Parabolic sprung tandem axle with wide tyres

         The parabolic sprung tandem axle with wide tyres ensures good adaptation, lowering of the pressure to the ground, and transport speeds of up to 40km/h.

 

Podmazovanje zadnje pogonske gredi

         Simple and effective lubrication of the rear drive shaft, the spreaders are equipped with a central lubrication system.

 

Chain conveyor consisting of four 13 x 36mm chain

         The spreader chain conveyor consisting of four 13 x 36mm chains. The tearing force of one chain is 18 tons. The scraping bars bolted on the conveyor are made of quality material, resistant to bending and twisting, which provide optimal supply of material to the spreading beaters.

 

Vertical spreading unit with four vertical spreading rotors

         Vertical spreading unit with four vertical spreading rotors to which are attached easily exchangeable special spreading segments resistant to wear.

 

Hydraulically movable rear wall

         The easily removed segmented spreading device, has a manure outlet 1.4 metres high. The hydraulically movable rear wall enables the use of the spreader as a classic trailer.

 

Oil filled, hydraulically driven side gearbox

         The oil filled, hydraulically driven side gearbox, enables steady continuously variable movement of the conveyor. Forward and reverse of the floor conveyor is standard.

 

The valve for continuously variable regulation

         The valve for continuously variable regulation of the conveyor movement enables the spreading of a desired amount of manure per hectare. Movement regulation and other commands are carried out from the tractor cab.

 

Support leg

         The support leg enables easy and fast lifting of the loaded spreader.

 

Multimedia
Video
Manual
Technical data
Gross weight (kg)
15500
Load capacity (kg)
11100
Weight [kg]
4400
Max. length (m)
6,92
Max. width (m)
2,30
Max. height (m)
3,02
Height of sides (m)
0,8
Loading surface (m)
4,8x1,9
Loading volume (m3)
12
Drawbar load (kg)
2000
Required tractor power [kW]
90
Distance between wheels (m)
1700
PTO (rpm)
1000
Equipment
Brake hydraulic tandem axle
Brake pneumatic tandem axle single circuit
Brake pneumatic tandem axle double circuit
Side walls - screwed
Spreading device vertikal - four beaters
Spreading device wide angle
Conveyor drive - hydrostatic
Conveyor floor -4 chains 13x36
Drawbar screwed upper
Drawbar screwed lower
Spreading device protection haydraulic wall
Hydraulically movable rear wall
Tyres 500/55-20 12PR
Tyres5 60/45-R 22,5 TL 152D
Wall extensions - steel mesh (0,65 m)
PTO shaft
Legend:      - Additional equipment,    - Serial equipment
Photo gallery
Orion 155TH PRO