The range of drum type mowers DRUMCUT have been developed recently for professional work in all conditions.
All six types are equipped with four drums.
Variable cutting height adjustment on each drum provides optimal ground hugging
Cutting height is normally adjusted on 25mm and can be increased up to 50mm.
1. Adjustment system is sealed in waterproof housing, permitting cutting height to be adjust from 30mm up to 55mm.
2. The drive is provided by hexagonal shaft and continuous to the mowing drum by bevel gears.
3. The bearings provide smooth running and long life performance.
4. The drum bodies are made of the best materials, the lower disk is made of resistant hardox material.
Easy and effective protection
When hitting an obstacle a mechanical release permits cutter bar to be pivoted to the rear up to 20 degrees and sensitivity of the protection system is adjustable.
Balance of the cutter bar is regulated hydraulically
The pressure on the ground can quickly and easily be reset before or during mowing. The level of pressure is visible on the pressure gauge.
Quality countering of the ground
The central hitch point to the pivoting cutter bar ensures optimal following of the ground side suspension is adaptable in the range from -15° up to +15°.
DRUMCUT 275, 300
