DRUMCUT DRUM 300 S FC

DRUMCUT DRUM 300 S FC 

DRUMCUT DRUM 300 S FC is a rear mounted drum mower with a finger conditioner (FC) and a central pivoting cutter bar mounting. It is intended for mowing all types of grass and is also effective under harsh conditions such as sandy soil, swamps or terrain with molehills. It is equipped with a continuous hydraulic ground pressure relief system and a cutting height adjustment system.

Drum rotary mowers

Technical data
Working width [m]
2,97
Weight [kg]
1179
Transport width [m]
1,95
Transport height [m]
3,51
PTO [rpm]
1000
Drum rotation [rpm]
2285
Numer of drums
4
Required tractor power [kW]
60
Number of knives
12
Cutting height [mm]
25-50
Capacity [ha/h]
3,2
Swath width (m)
1,4-2,6
Equipment
Finger conditioner - FC
PTO shaft
Hydraulic folding
- Obligatory equipment,    - Additional equipment,    - Serial equipment
Multimedia
Photo gallery
Drumcut
High-quality adaptation to terrain
Perfect ground contour following is the combination of the arm mounting location and the central pivoting cutter bar. The maximum angle of adaptation to terrain is ±15°.

 

In the event of a collision with an obstacle, the guard<br />is immediately released

In the event of a collision with an obstacle, the guard is immediately released. Due to the special position of the hinge, the cutter bar simultaneously moves backwards and upwards. After colliding with an obstacle, the cutter bar automatically returns into the operating position. The sensitivity of the safety mechanism is freely adjustable.

 

Hydraulic relief<br />

The hydraulic ground pressure relief rate of the cutter bar can be easily and quickly adjusted before and during mowing. The relief rate is visible on the manometer.

 

The neoprene spring

The neoprene spring ensures reliable and smooth operation.

 

Toothed belt transmission

Conditioner with a toothed belt drive ensures:

  • lower maintenance costs
  • long life span,
  • withstanding of higher loads

 

Finger conditioner (FC)

FINGER CONDITIONER (FC)
It is possible to set the intensity of conditioning by allowing the forage flow to completely or partially pass over the finger conditioner roller via a deflector plate.

 

Cutter drum characteristics
        

Cutter drum characteristics.