SILVERCUT TC nasl

SILVERCUT DISC 300 TC RC 

SILVERCUT DISC 300 TS RC je vlečena diskasta kosilnica z gumijastim gnetilnikom in sredinsko vpetim kosilnim grebenom. Enostavna in kompaktna varjena konstrukcija stroja zagotavlja visoko togost, izredno vodljivost in optimalen prenos moči od traktorja do grebena kosilnice.

Diskaste kosilnice

Tehnični podatki
Delovna širina (m)
2,90
Št. diskov
7
Št. nožev
14
Dimenzija noža (mm)
110x48x4
Vrtljaji diskov (vrt./min)
3000
Vrtljaji kardanske gredi (vrt./min)
1000
Masa (kg)
1880
Potrebna moč traktorja (kW/KM)
60
Zmogljivost (ha/h)
3,50
Višina reza (mm)
40-70
Širina redi (m)
1,10 - 2,40
Gnetilnik
gumi
Smer vrtenja diskov
v paru
Transportna širina (m)
3,00
Transportna višina (m)
2,00
Transportna dolžina (m)
7,38
Gume
11.5/80- 15
Oprema
QCS (sistem hitre menjave nožev) in QCS orodje
Rezervni noži
Varovalni zatiči
Zložljiva zaščita pred kamni s CE Norm
Pogonski kardan
Drsnik dodatni
Drsnik za višji odkos
Usmerjevalki kpl.
Omejevalo višine priklopa kpl.
Širokokotna kardanska gred
- Zahtevana dodatna oprema,   - Dodatna oprema,   - Serijska oprema
Multimedija
Fotogalerija

 

The input pivoting gearbox on the hitch can be rotated for ±90° offering excellent maneuverability.

 

 

Turning on headlands is much easier thanks to the special intermediate pivoting gearbox. The turning cycle is significantly reduced.

 

 

S-FLOW linkage is based on the innovative design of the mower mounting cutter bar. The complete mowing section is suspended independently from the main chassis. The response of the linkage system not only guides the cutter bar perfectly to the terrain but, in combination with the hydro-pneumatic suspension, ensures even ground pressure and a clean cut across the field.

 

 

The hydraulic system of the mower is equipped with double-coated hydraulic hoses that withstand pressure of up to 280 bar and closed circuit cylinders that prolong the lifespan of the hydraulic system.

 

 

Rigid frame with wheels positioned close to the cutter bar ensure quick response to the contour of the field.

 

 

A simple easy-accessible crank adjust the whole cutter bar up or down to optimize the cutting height.


 

In the transport position the cutter bar is raised 400 mm of the ground. The hydraulic lift system of the cutter bar is safe-guarded by a hydraulic valve. For safe transport of the mower it is equipped with road safety and lighting equipment. The mower can be operated by only one leaver.

 

 

Rubber conditioner (RC)