SILVERCUT TC nasl

SILVERCUT DISC 300 TC RC 

The trailed mower conditioner with a central pivot drawbar offers excellent maneuverability and ground contour following. The shift of the mower to the left or to the right side of the tractor allows mowing a field in one continuous process. Time consuming short runs are eliminated and mowing capacity is increased.

Disc rotary mowers

Technical data
Working width (m)
2,90
No. of discs
7
No. of blades
14
Blade dimensions (mm)
110x48x4
Discs rotation speed (rpm)
3000
PTO rotation speed (rpm)
1000
Weight (kg)
1880
Tractor power req. (kW/HP)
60
Capacity (ha/h)
3,50
Cutting height (mm)
40-70
Swath width (m)
1,10 - 2,40
Conditioner type
rubber roller
Discs rotation
paired
Transport width (m)
3,00
Transport height (m)
2,00
Transport lenght (m)
7,38
Tyres
11.5/80- 15
Equipment
QCS (quick blade change system) with QCS tool
Shear safety pins
Foldable protective curtains against flying debris
Spare blades
PTO shaft
Wear skid
Topping skid, 7–10 cm
Additional swath wheels, LH and RH
Three point hitch height limitation
Wide-angle PTO shaft
- Obligatory equipment,    - Additional equipment,    - Serial equipment
Multimedia
Photo gallery

 

The input pivoting gearbox on the hitch can be rotated for ±90° offering excellent maneuverability.

 

 

Turning on headlands is much easier thanks to the special intermediate pivoting gearbox. The turning cycle is significantly reduced.

 

 

S-FLOW linkage is based on the innovative design of the mower mounting cutter bar. The complete mowing section is suspended independently from the main chassis. The response of the linkage system not only guides the cutter bar perfectly to the terrain but, in combination with the hydro-pneumatic suspension, ensures even ground pressure and a clean cut across the field.

 

 

The hydraulic system of the mower is equipped with double-coated hydraulic hoses that withstand pressure of up to 280 bar and closed circuit cylinders that prolong the lifespan of the hydraulic system.

 

 

Rigid frame with wheels positioned close to the cutter bar ensure quick response to the contour of the field.

 

 

A simple easy-accessible crank adjust the whole cutter bar up or down to optimize the cutting height.


 

In the transport position the cutter bar is raised 400 mm of the ground. The hydraulic lift system of the cutter bar is safe-guarded by a hydraulic valve. For safe transport of the mower it is equipped with road safety and lighting equipment. The mower can be operated by only one leaver.

 

 

Rubber conditioner (RC)