SILVERCUT 1500 T FC

SILVERCUT DISC 1500 T FC 

The mowing combination equipped with four rear cutter bars represents a new large-area mower with up to 22.5 ha/h capacity.

Disc rotary mowers

Technical data
Working width (m)
14,90
No. of discs
32
No. of blades
64
Blade dimensions (mm)
110x48x4
Discs rotation speed (rpm)
3000
PTO rotation speed (rpm)
1000
Weight (kg)
9100
Tractor power req. (kW/HP)
258
Capacity (ha/h)
22,50
Cutting height (mm)
40-70
Swath width (m)
1,60 - 3,00
Conditioner type
finger
Discs rotation
paired
Transport width (m)
2,99
Transport height (m)
3,99
Transport lenght (m)
7,50
Equipment
QCS (quick blade change system) with QCS tool
Shear safety pins
Foldable protective curtains against flying debris
Spare blades
PTO shaft
Swath wheels - outer
Swath wheels - inner
- Obligatory equipment,    - Additional equipment,    - Serial equipment
Multimedia
Photo gallery
SILVERCUT DISC 1500 T FC 1SILVERCUT DISC 1500 T FC 2SILVERCUT DISC 1500 T FC 3SILVERCUT DISC 1500 T FC 4SILVERCUT DISC 1500 T FC 5SILVERCUT DISC 1500 T FC 6SILVERCUT DISC 1500 T FC 7SILVERCUT DISC 1500 T FC 8

A high-capacity mowing combination, with up to 22.5 ha/h capacity, represents our response to the increased requirements of the highly professional users. The five separate cutting units (four rear and one front) equipped with hydro-pneumatic suspension provide perfect contour following even at high speeds. The mower combination attached to the existing tractor significantly reduces the investment and production costs in comparison to the self-propelled solutions.

 

High
 mowing capacity

High mowing capacity - up to 22,5 ha/h. Working width - 14,9 m.

 

Strong support arms The hydro-pneumatic suspension system ensures a precise cut and clean high quality forage. Easy and hassle-free mowing on all types of terrain and in all conditions. The relief rate can be easily and quickly adjusted before and during mowing.

 

Direct drive to the first disc Direct drive to the first disc via a PTO shaft, angle drive and universal joint.

 

Collision safety system In the event of a collision with an obstacle, the collision safety system is immediately released. The special position of the hinge enables the cutter bar to move simultaneously backward and upward. After colliding with an obstacle, the cutter bar automatically returns to the operating position.

 

Hydraulically aided stabilisation

Hydraulically aided stabilisation of cutter bar enables the sequential lift of the cutter bar. First the inside of the cutter bar is lifted and subsequently the outside of the cutter bar.

 

Hydraulically adjustable hitching

Hydraulically adjustable hitching height enables the optimal chassis position regardless of the height of the drawbar.

 

Cutter bar characteristics

Cutter bar characteristics.