DISC 900 C FC

SILVERCUT DISC 900 C  

The SILVERCUT DISC 900 C is composed by two rear mounted centrally fitted cutter bars. It is used in combination with the SILVERCUT DISC 300 F or SILVERCUT DISC 300 F ALP front mower. The mower combination is suitable for larger farms and Contractors, requiring high efficiency, durability, fast and easy control and low maintenance costs.

Disc rotary mowers

Technical data
Working width (m)
8,74
No. of discs
16
No. of blades
32
Blade dimensions (mm)
110x48x4
Discs rotation speed (rpm)
3000
PTO rotation speed (rpm)
1000
Weight (kg)
1860
Tractor power req. (kW/HP)
90
Capacity (ha/h)
12,00
Cutting height (mm)
40-70
Swath width (m)
1,80 - 2,20
Discs rotation
paired
Transport width (m)
2,86
Transport height (m)
3,65
Transport lenght (m)
2,20
Equipment
QCS (quick blade change system) with QCS tool
Shear safety pins
Foldable protective curtains against flying debris
Spare blades
PTO shaft
Wear skid
Topping skid, 7–10 cm
Disc extension
Swath wheels - outer
Swath wheels - inner
- Obligatory equipment,    - Additional equipment,    - Serial equipment
Multimedia
Photo gallery
SILVERCUT DISC 900 C FC 1SILVERCUT DISC 900 C FC 2SILVERCUT DISC 900 C FC 3SILVERCUT DISC 900 C FC 4SILVERCUT DISC 900 C FC 5SILVERCUT DISC 900 C FC 6SILVERCUT DISC 900 C FC 7SILVERCUT DISC 900 C FC 8SILVERCUT DISC 900 C FC 9
High-quality adaptation to terrain
High-quality adaptation to terrain
The combination of the arm mounting location and
central fitting of the cutter bar frame ensures optimum
adaptation to terrain.
Maximum angle of adaptation to terrain is ±15°.

 

In the event of a collision with an obstacle, the guard<br />is immediately released
In the event of a collision with an obstacle, the guard
is immediately released. Due to the special position of
the hinge, the cutter bar simultaneously moves
backwards and upwards.
After colliding with an obstacle, the cutter bar
automatically returns into the operating position.
The sensitivity of the safety mechanism is freely
adjustable.

 

Lifting the cutter bars during operational position
Lifting the cutter bars into the operating position for
easy passage over mown swaths.

 

Hydraulic relief
The discharge rate can be easily and quickly adjusted
before or during mowing. During mowing, the relief
rate is visible on the manometer.

 

Four support legs with a fast fixing system.

[When the season is
over, the machine can
be stored on a
2.2×3m surface in a
space lower than 4m.
Four support legs with
a fast fixing system.
The basic layout of the
machine when it is
not attached defines
the operating position
(fitting height and
forward tilt).

 

Paired disc rotation direction

Paired disc rotation direction
Quick and efficient feed discharge
The specially designed discs ensure a quick and
efficient forage flow even when mowing downhill.

 

Cutter bar characteristics

Cutter bar characteristics.