SILVERCUT DISC 380 S 991

SILVERCUT DISC 340 S  

The rear-mounted disc mower with a central pivoting hydro-pneumatically suspended cutter bar allows steady, fast and reliable mowing on large areas.

Disc rotary mowers

Clear all filters
Technical data
Working width (m)
3,25
No. of discs
8
No. of blades
16
Blade dimensions (mm)
110x48x4
Discs rotation speed (rpm)
3000
PTO rotation speed (rpm)
1000
Weight (kg)
850
Tractor power req. (kW/HP)
54
Capacity (ha/h)
4,00
Cutting height (mm)
40-70
Swath width (m)
1,80 - 2,20
Discs rotation
paired
Transport width (m)
1,86
Transport height (m)
3,65
Equipment
QCS (quick blade change system) with QCS tool
Shear safety pins
Foldable protective curtains against flying debris
Spare blades
PTO shaft
Swath board, LH
Swath board, RH
Wear skid
Topping skid, 7–10 cm
Gearbox for 540 rpm, in lieu of 1000 rpm
Disc extension
Road safety & Lighting equipment
Curtain protection rail
Mower stand
Walterscheid PTO shaft 1000 rpm
Additional swath cone
Three point hitch height limitation
- Obligatory equipment,    - Additional equipment,    - Serial equipment
Multimedia
Photo gallery
SILVERCUT DISC 340 S 1SILVERCUT DISC 340 S 2SILVERCUT DISC 340 S 3SILVERCUT DISC 340 S 4SILVERCUT DISC 340 S 5SILVERCUT DISC 340 S 6SILVERCUT DISC 340 S 7SILVERCUT DISC 340 S 8SILVERCUT DISC 340 S 9SILVERCUT DISC 340 S 10SILVERCUT DISC 340 S 11SILVERCUT DISC 340 S 12SILVERCUT DISC 340 S 13SILVERCUT DISC 340 S 14SILVERCUT DISC 340 S 15SILVERCUT DISC 340 S 16SILVERCUT DISC 340 S 17SILVERCUT DISC 340 S 18SILVERCUT DISC 340 S 19

Perfect ground contour following is the combination of the arm mounting location and the central pivoting cutter bar. The maximum angle of adaptation to terrain is -15° and +35°.

 

The main support frame
 

Collision safety device.

In the event of a collision with an obstacle the collision safety device is immediately released. Due to the special position of the hinge, the cutter bar simultaneously moves backward and upward. After colliding with an obstacle, the cutter bar automatically returns into the operating position. The sensitivity of the safety mechanism is freely adjustable.
 

Drive through the PTO shaft with safety and free-running clutch.
 

Hydropneumatic suspension rate of the cutter bar can be easily and quickly adjusted before and during mowing. The relief rate is visible on the manometer.
 

The drive is connected to the first disc by the PTO shaft, an angle gear and a double universal joint.

 

Discs rotating in pairs ensure a quick and efficient forage flow over the cutter bar.
 

Support legs for storage (optional) save space around the machine. The mower is upright and takes up to 3,2 m2.

 

In the transport position, the mower is tilted 120° degrees ensuring:
• a transport height which enables driving through low passages,
• better visibility during transport,
• better stability during transport and thus a higher transport speed,
• the centre of gravity of the machine is closer to the centre
of gravity of the tractor.

 

 

Cutter bar characteristics

Cutter bar characteristics.