SILVERCUT DISC 300 S FC is a rear mounted disc mower with a central pivoting cutter bar and finger conditioner (FC). It has a continuous hydraulic relief system that ensures effective ground contour following. The main support frame of the machine ensures high rigidity and optimum power transfer from the tractor to the cutter bar.

Disc rotary mowers

Technical data
Working width (m)
No. of discs
No. of blades
Blade dimensions (mm)
Discs rotation speed (rpm)
PTO rotation speed (rpm)
Weight (kg)
Tractor power req. (kW/HP)
Capacity (ha/h)
Cutting height (mm)
Swath width (m)
1,40 - 2,80
Conditioner type
Discs rotation
Transport width (m)
Transport height (m)
QCS (quick blade change system) with QCS tool
Shear safety pins
Foldable protective curtains against flying debris
Spare blades
PTO shaft
Wear skid
Topping skid, 7–10 cm
Gearbox for 540 rpm, in lieu of 1000 rpm
Disc extension
Road safety & Lighting equipment
Curtain protection rail
Mower stand
Walterscheid PTO shaft 1000 rpm
Walterscheid PTO shaft 540 rpm
Additional swath board, LH and RH
Three point hitch height limitation
Additional swath board extension
- Obligatory equipment,    - Additional equipment,    - Serial equipment
Photo gallery


Perfect ground contour following is the combination
of the arm mounting location and the central pivoting
cutter bar. The maximum angle of adaptation to terrain
is -15° and +20° .

The main support frame

Collision safety device.

In the event of a collision with an obstacle the collision safety device is
immediately released. Due to the special position of the hinge, the cutter bar
simultaneously moves backward and upward. After colliding with an obstacle,
the cutter bar automatically returns into the operating position. The sensitivity of the safety mechanism is freely adjustable.

Drive through the PTO shaft with safety and free-running clutch. 


The hydraulic ground pressure relief rate of the cutter bar can
be easily and quickly adjusted before and during mowing.
The relief rate is visible on the manometer.

The drive is connected to the first disc by the PTO shaft, an
angle gear and a double universal joint.

Discs rotating in pairs ensure a quick and efficient forage flow
over the cutter bar.

Support legs for storage (optional) save space around the
machine. The mower is upright and takes up to 3,2m2.


In the transport position, the mower is tilted 120° degrees ensuring:
• a transport height which enables driving through low passages,
• better visibility during transport,
• better stability during transport and thus a higher transport speed,
• the centre of gravity of the machine is closer to the centre
of gravity of the tractor.



Finger conditioner (FC)

Finger conditioner (FC)

  • Option of adjusting the
    conditioning intensity,
  • Plastic finger for
    optimal conditioning. 


Paired disc rotation direction

Paired disc rotation direction
Quick and efficient feed discharge
The specially designed discs ensure a quick and
efficient forage flow even when mowing downhill.


Cutter bar characteristics

Cutter bar characteristics.