Nasl SILVERCUT DISC 300 F 340 F S FLOWnovo


The front mounted disc mowers adapt perfectly to the terrain and allow even and fast mowing on larger surfaces. S-FLOW linkage is available for advanced ground contour following.

Disc rotary mowers

Technical data
Working width (m)
No. of discs
No. of blades
Blade dimensions (mm)
Discs rotation speed (rpm)
PTO rotation speed (rpm)
Weight (kg)
Tractor power req. (kW/HP)
Capacity (ha/h)
Cutting height (mm)
Swath width (m)
1,40 - 2,40
Discs rotation
Transport width (m)
QCS (quick blade change system) with QCS tool
Shear safety pins
Foldable protective curtains against flying debris
Spare blades
PTO shaft
Wear skid
Topping skid, 7–10 cm
Disc extension
Curtain protection rail
Quick A Frame linkage PH2
Quick A Frame linkage PH2 alpine
Hitch extension 350 mm
Lower hitch extension 250 mm
Top hitch extension 150 mm
Lower hitch extension 150 mm
Spring – for Hitch extension 350 mm
Additional swath wheels, LH and RH
Road safety equipment
Lighting equipment
BY-PY PTO shaft for angles from 20–30°
Hitch SILVERCUT DISC F FC/RC (classical tractor - shorter)
Mechanical ground pressure relief (springs) - Hitch SILVERCUT DISC F
Hydropneumatic ground pressure relief - Hitch SILVERCUT DISC F
Curtain protection rear - Hitch SILVERCUT DISC F
Curtain protection rear - Hitch S FLOW
Hitch S FLOW
- Obligatory equipment,    - Additional equipment,    - Serial equipment
Photo gallery
SILVERCUT DISC 300 F ALPSilvercut f sflowSilvercut f sflow1Silvercut f sflow2Silvercut f sflow3Silvercut f sflow4
Because of its robust and well-thought-out design the SILVERCUT DISC F mower offers long term and reliable use. The front mower offers great visibility and excellent control while mowing. The mower is very responsive and is very accurate when mowing near the edge, the fence or other obstacles. The lower pushing force on the cutter bar allows the mower to respond better to changes in terrain. This offers an even and clean cut and does not damage the grass.


S-FLOW linkage is based on the innovative design of the mower mounting cutter bar. The response of the linkage system not only guides the cutter bar perfectly to the terrain but, in combination with the hydropneumatic suspension, ensures even ground pressure and a clean cut across the field.


High-quality adaptation to terrain (left-right tilt angle ±9°).

Robust linkage with a hydropneumatic suspension (Hydraulic float) offers excellent responsiveness to changes in terrain.


Direct drive via PTO shaft, angle gear and double universal joint directly to the first disc.


Combined disc rotation

Combined disc rotation for optimum feed flow and swath width.


Cutter bar characteristics

Cutter bar characteristics